Farm Equipment - WD Lift Arm seal part number?

Print Page | Close Window

WD Lift Arm seal part number?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11059
Printed Date: 23 Jan 2025 at 6:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD Lift Arm seal part number?

Posted By: Ron(MN)
Subject: WD Lift Arm seal part number?
Date Posted: 14 Apr 2010 at 8:10pm

My nephew bought a 1950 WD several months ago and finally got it home this weekend. It'll be working tractor but it does need some TLC. Both lift arm rams leak pretty bad and I do not have parts book for a WD. Does anyone know what the seal part numbers might be? If not I'll check with the AGCO dealer in either Smith's Mill or Mountain Lake.

Thanks in advance for any info.

Ron

Replies:

Posted By: CTuckerNWIL
Date Posted: 14 Apr 2010 at 8:18pm

You might try tightening them up first. I think a channel lock works OK on the packing nut. They will be a chevron packing, not a regular seal.The chevron type packings need to weep just a little oil or they will be torn up.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Don(MO)
Date Posted: 14 Apr 2010 at 8:45pm

I with Charlie on the ram packing nuts. I back off the nut first then tighten it up.

But if you still need the packing you can get them form ACGO.You can look them up at ACGO's on line part site.

http://www.agcopartsbooks.com/EpsilonWeb/login.aspx?region=NorthAmerica - http://www.agcopartsbooks.com/EpsilonWeb/login.aspx?region=NorthAmerica

Or just go to a hyd supply store the packing is 1 1/4" on the ID.

Don

-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.

Posted By: Ron(MN)
Date Posted: 14 Apr 2010 at 8:51pm

Thanks guys! I'll try tightening them before we go any further and see what happens and thanks for the AGCO link too.

Ron