Print Page | Close Window

b hydraulic cultivators conversion???

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10991
Printed Date: 27 Sep 2024 at 6:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: b hydraulic cultivators conversion???
Posted By: nmwagschal
Subject: b hydraulic cultivators conversion???
Date Posted: 12 Apr 2010 at 8:15pm

Is there any way to convert  my manual cultivator lift on my '41 B to use the hydraulic cylinder on the rear  to raise and lower the culticators?  Looking at it i would think there would be a way , i know i am not the first person to think of this , but i cant seem to find any discussions or pictures about it




Replies:
Posted By: Chalmersbob
Date Posted: 12 Apr 2010 at 8:41pm
There sure is a way. But it entails about 4 or 5 changes. 1 the rod from the hand lift lever to the rockshaft has to be a male-female 2 piece rod so the hydraulics can lift the cultivator and not affect the hand lift. the 2 springs are removed and only 1 is used on the right, to put down pressure on the cultivators, 3 you will need a C shaped bracket to bolt into the hole where the right spring was removed. it wraps around the shaft and the bar coupling from the hydra ram bolts to it. The factory bar that connects to the rear rockshaft, has a hole in it for the spring to reattach. and of course you must has the rear rock shaft. I can scan a picture from my manual to explain it better.
Bob 


Posted By: Chalmersbob
Date Posted: 12 Apr 2010 at 8:42pm
send me your e-mail address and I'll send you a picture.
mailto:ebertbob5@aol.com - ebertbob5@aol.com


Posted By: nmwagschal
Date Posted: 12 Apr 2010 at 8:46pm
i sent you an email
 thanks


Posted By: GlenninPA
Date Posted: 12 Apr 2010 at 10:11pm
If you get the hydraulic lift kit for the sickle bar mower, it is also the same to lift the cultivators.
 
Go with what Bob sends you. Easier than finding one.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net