Tractor and plow ?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10983
Printed Date: 23 Jan 2025 at 4:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Tractor and plow ?
Posted By: R Aiken
Subject: Tractor and plow ?
Date Posted: 12 Apr 2010 at 7:42pm
Will my D19
 with this AC 3pt hitch
 |
Replies:
Posted By: R Aiken
Date Posted: 12 Apr 2010 at 7:45pm
And this plow work togather. 
|
Posted By: Roger Nolin
Date Posted: 12 Apr 2010 at 8:00pm
| I think it would, can't see why not.< id="gwProxy" ="">< ="jsCall;" id="jsProxy" =""> |
Posted By: JoeO(CMO)
Date Posted: 12 Apr 2010 at 8:09pm
|
It should take it with ease. You will need to take all sway out of the 3 point adaptor to keep it in control making full use of the steering of the plow.
When a semi-mount is used for instance on my 185 it has to have the sway blocks on-no side movement.
|
Posted By: Butch(OH)
Date Posted: 12 Apr 2010 at 8:23pm
| Yes it will hitch together, no it will not work as it should. A 3 point mounted or semi mounted plow needs one of two things to maintain any kind of even depth. A combination of draft and position control, or a gauge wheel, you have neither. If your hold works well on the lift arms you might be able to use it and the traction booster to maintain some semblance of even depth but I wouldnt want the job of trying to keep up with the levers for too many acres. |
Posted By: EdIL
Date Posted: 12 Apr 2010 at 8:26pm
| That 3 pt adapter is a little on the light side to handle the lateral force and weight of the 4 bottom plow. The adapter typically breaks near the front weld on the left hand side. I've seen many broken with a lighter load applied. Also, the vertical adjusting link on the left hand arm on your adapter is usually on the right hand side to level the implement when the tractor is in the furrow. Good luck! |