Print Page | Close Window

616 not charging

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=109549
Printed Date: 26 Nov 2024 at 2:18pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 616 not charging
Posted By: Tracy Martin TN
Subject: 616 not charging
Date Posted: 27 Jul 2015 at 9:32pm
How can you check to see what causes it not to charge. How do you check stater? Could it be rectifier? Any help appreciated. Tracy

-------------
No greater gift than healthy grandkids!



Replies:
Posted By: HudCo
Date Posted: 27 Jul 2015 at 11:41pm
i think that probley has to be putting out 28 to 33 volt ac at 2800 to 3000rpm for the stator try to take a look in the book tomorrrow   


Posted By: Steve in NJ
Date Posted: 28 Jul 2015 at 6:14am
Seems to be a common problem with these 616-720 machines. I've been workin' on gathering some parts together to design an Alternator system that would fit for these machines. Until I get my engine back in its engine box, I'll see what parts that I came up with will work without to much hassle of an installation. You need to pick yourself up a service manual for your unit Tracy. This way you can perform some testing if need be and familiarize yourself with the machine better. I know in my manual it tells how to troubleshoot the system. If Mike doesn't come up with somethin', I can probably e-mail somethin' to ya...
Steve@B&B

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife


Posted By: HudCo
Date Posted: 28 Jul 2015 at 9:20am

vr test 1800 to 3600 = 13.4 to 14 vdc measured at the battery.                                  stator test 17vac across the two yellow wires no rpms given would try about 2000rpm                                                                                                                 stator rx1 scale ohm 0.8 at yellow wires also cannot be open  ( engine off )  



Posted By: Tracy Martin TN
Date Posted: 28 Jul 2015 at 12:59pm
I have a manual. I was wondering if there was a way to check it without it running? I was hoping to check it not running and find the problem. Are the stator still available for them? Thanks tracy

-------------
No greater gift than healthy grandkids!


Posted By: HudCo
Date Posted: 28 Jul 2015 at 4:17pm
ohm test for stator is engine off



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net