Farm Equipment - 190 pump noise

Print Page | Close Window

190 pump noise

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10946
Printed Date: 23 Jan 2025 at 5:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 pump noise

Posted By: Josh(NE)
Subject: 190 pump noise
Date Posted: 11 Apr 2010 at 8:29pm

I got a new hyd pump for my 190 from abilene machine. It is a new aftermarket pump, manufacturer unknown. My question is that it has a humm noise to it especially at low rpms is this normal? My old pump had a noise to it to, but it went out. Any help is appreciated.

-------------
Allis Express
'65 190XT, 37 B, '72 170, '83 8030, and the IH 560 was a mistake

Replies:

Posted By: AndrewGubbels
Date Posted: 11 Apr 2010 at 9:20pm

Josh Sorry I have not returned your calls yet. We have been swamped in the shop. Farmers are getting antsy. I would say it could be in the bearings in the front on your pump drive. The pump could be that tight inside. You could put a few hours on it and see if it goes away. If not let where you got in know about it and see what they ahve to say also.

Andrew

-------------
Andrew Gubbels
Gubbels Restoration

Posted By: Josh(NE)
Date Posted: 11 Apr 2010 at 9:38pm

New bearings and very clean used gear were used.

-------------
Allis Express
'65 190XT, 37 B, '72 170, '83 8030, and the IH 560 was a mistake

Posted By: Josh(NE)
Date Posted: 13 Apr 2010 at 11:38pm

bump

-------------
Allis Express
'65 190XT, 37 B, '72 170, '83 8030, and the IH 560 was a mistake