Back to back WC transmissions
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=109443
Printed Date: 25 Nov 2024 at 5:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Back to back WC transmissions
Posted By: slingblade
Subject: Back to back WC transmissions
Date Posted: 25 Jul 2015 at 10:29am
| I am doing a repower on a huber M600 grader. I am going to use a WD motor and frame rails. What I need to know, is what kind of speed will I get with those trannys back to back I'm trying to get down to about 1mph. I do not know the rear end ratio. But what would it to a WD as for speed? Thanks |
Replies:
Posted By: DrAllis
Date Posted: 25 Jul 2015 at 5:00pm
| Normally road gear is 10 MPH and low gear is 2 MPH, so if you run both trannys in LOW gear you should get about .4 MPH . |
Posted By: CTuckerNWIL
Date Posted: 25 Jul 2015 at 6:31pm
If they are back to back, then with both trannys in low it will run faster. If both trannys face the normal direction, front to back, it will run slower in low low.
 ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: slingblade
Date Posted: 25 Jul 2015 at 10:33pm
|
I guess I should have said two in a row to be more clear but I think drallis understood what I was trying to say. I am assuming a wc trannys will bolt directly to a wd bell housing?thanks for the reply |
Posted By: mattb
Date Posted: 28 Jul 2015 at 12:09pm
|
yes they will bolt up to bellhousing. Reverse to reverse is the slowest forward speed |