| Model B Steering Support pin
 
 Printed From: Unofficial Allis
 Category:  Allis Chalmers
 Forum Name:  Farm Equipment
 Forum Description:  everything about Allis-Chalmers farm equipment
 URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=109271
 Printed Date: 30 Oct 2025 at 7:29pm
 Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
 
 
 Topic: Model B Steering Support pin
 Posted By: 1939Dodge
 Subject: Model B Steering Support pin
 Date Posted: 21 Jul 2015 at 7:01pm
 
 
        
          | Anyone know what this pin behind  the control box is for? It goes through the steering support tube, has cotter pins on either side. It's not drilled for the choke rod. Any ideas? It is at the very top of the picture. Thanks!
   |  
 
 Replies:
 Posted By: 1939Dodge
 Date Posted: 21 Jul 2015 at 7:02pm
 
 
        
          | I hate this laptop... The pin is at the very far left in the otherwise turned over picture....
 |  
 Posted By: Chalmersbob
 Date Posted: 21 Jul 2015 at 9:03pm
 
 
        
          | I never saw that before. Mine have a bolt and nut and the ground strap is mounted on the other side. Bob 
 -------------
 4 B's, 1 C's,3 CA's, 2 G's WD, D14, D15, B-1, B10, B12, 712S,
 |  
 Posted By: Rog(NCWI)
 Date Posted: 21 Jul 2015 at 9:32pm
 
 
        
          | That is where the grounding strap is attach to when you have starter and lights on your tractor. |  
 Posted By: 1939Dodge
 Date Posted: 22 Jul 2015 at 6:52am
 
 
        
          | The battery ground isn't in the picture, but it's above the control box. Does the starter have a separate ground? I thought it grounded through the frame... |  
 Posted By: Chalmersbob
 Date Posted: 22 Jul 2015 at 9:20pm
 
 
        
          | Yes, the starter is grounded through the torque tube. but the battery is grounded to the post in your picture with a bolt and nut. After the old rust and paint are removed. LOL Bob 
 -------------
 4 B's, 1 C's,3 CA's, 2 G's WD, D14, D15, B-1, B10, B12, 712S,
 |  
 Posted By: Ken in Texas
 Date Posted: 23 Jul 2015 at 5:47am
 
 
        
          | Could be the B may have been a handcranker at one time. The steering support post on a handcrank is drilled with a different set of holes than one with electric start. The throttle Quadrant on a handcranker was  mounted where the electric box is mounted on a electric start B. |  
 Posted By: john2189
 Date Posted: 24 Jul 2015 at 3:56pm
 
 
        
          | The battery box has a tab that is bolted there on my 41 and 42 
 John
 
 -------------
 '41 Allis B
 '45 Allis B
 '49 Farmall Cub
 '72 IH Cub
 |  
 
 |