Farm Equipment - Steve (ill) Question...

Print Page | Close Window

Steve (ill) Question...

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10842
Printed Date: 23 Jan 2025 at 10:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Steve (ill) Question...

Posted By: GBACBFan
Subject: Steve (ill) Question...
Date Posted: 09 Apr 2010 at 10:01pm

I don't think I saw how your B three point project turned out. it looked like you were on the right track, but I don't think I saw the end result. Would you provide an update? THANKS.

-------------
"The trouble with quotes on the Internet is that you can never know if they
are genuine." - Mark Twain

Replies:

Posted By: steve(ill)
Date Posted: 09 Apr 2010 at 10:21pm

i got cold last winter and came back inside...LOL I have the arms mounted. USed the 32 inch 8N arms and shortened them about 6 inches. Modified the rock shaft with two lift arms. Welded on a brace to bolt a WD45 hydraulic cylinder to it for lift. I ended up moving the rock shaft forward under the seat about 6 inches so the rock shaft sets basically striaght above the lift arm pivot points. Helps keep the geometry straight. THe back end of the cylinder is to set under the alxe housing, near the pivot point for the right lift arm. I started designing a bracket for the cylinder that is part of the 4 x 4 angle iron between the final drive cases--- thats where i stopped. Lot going on at work, and helping kids on their house this winter.. time to get back out to the shed in may.

-------------
Like them all, but love the "B"s.

Posted By: GBACBFan
Date Posted: 09 Apr 2010 at 10:43pm

That's a cool project, and typical of your workmanship, from what I recall. Please keep us posted. The photo history of a project is always interesting.

-------------
"The trouble with quotes on the Internet is that you can never know if they
are genuine." - Mark Twain