Garden Tractors - Allis 620

Print Page | Close Window

Allis 620

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=108210
Printed Date: 26 Nov 2024 at 1:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis 620

Posted By: Jim NEIN
Subject: Allis 620
Date Posted: 28 Jun 2015 at 9:04pm

Got done mowing today and shut it off. A little later tried to start it and it just clicks. Any suggestions? Thanks

Replies:

Posted By: den/southern illinoi
Date Posted: 28 Jun 2015 at 9:05pm

Make sure you do not have one of the pto switches on...that's what it sounds like to me but could be something else. Den

-------------

Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.

Posted By: Jim NEIN
Date Posted: 28 Jun 2015 at 9:19pm

That was my thought to but they are both off.

Posted By: JoeO(CMO)
Date Posted: 28 Jun 2015 at 9:24pm

battery

-------------

Posted By: DSeries4
Date Posted: 28 Jun 2015 at 10:13pm

Mine does that occasionally. I play around with the pto switch as few times and it will eventually fire up. Might also want to check that you hydrostatic lever is in the neutral position.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: JoeO(CMO)
Date Posted: 29 Jun 2015 at 8:01am

If you are hearing a click your switches are ok, just not enough voltage to get the job done.

If you don't hear a click you are not getting voltage to the solenoid

-------------

Posted By: Jim NEIN
Date Posted: 29 Jun 2015 at 3:33pm

I found the battery cable was broke off at the starter. thanks for the replys.