Farm Equipment - Help..splitting 7000

Print Page | Close Window

Help..splitting 7000

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10809
Printed Date: 23 Jan 2025 at 10:54am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Help..splitting 7000

Posted By: Wes (VA)
Subject: Help..splitting 7000
Date Posted: 09 Apr 2010 at 8:53am

Splitting our 7000 ahead of the transmission..took all the bolts out of the case, and it wont come apart. Took the top off the transmission and can see what looks like two bolts or studs threaded into the front of the case from the opposite side?? Is the gasket just holding it now? Thanks, -Wes

Replies:

Posted By: skipwelte
Date Posted: 09 Apr 2010 at 9:16am

Ya gotta remove the trans brake puck and shaft or it will never come apart, dont force it to much or youll break something expensive!!!

Posted By: Wes (VA)
Date Posted: 09 Apr 2010 at 9:31am

Ok..so does that mean I have to pull the valve body off?? or how do you remove the trans brake?

Posted By: skipwelte
Date Posted: 09 Apr 2010 at 10:07am

Yes, pull the valve body for access to the shaft and puck, the shaft comes out the left side but I cannt remember what holds it in. Youll need the valve body off anyway to get the puck and shaft back thru,. Good luck

Posted By: DrAllis
Date Posted: 09 Apr 2010 at 12:04pm

After removing the valve assembly, I think there's four tubes that have to be pulled out thru the side. The trans brake lever shaft pulls out the left side after driving out a roll pin.