Farm Equipment - d14 gears

Print Page | Close Window

d14 gears

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10788
Printed Date: 06 Jun 2024 at 4:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: d14 gears

Posted By: Pipe
Subject: d14 gears
Date Posted: 08 Apr 2010 at 7:58pm

what makes the d-14 jump out of gear and if it jumps out of 3rd and 4th is this also common or a sign of bigger problems . what would be the fix ?

Replies:

Posted By: norm [ind]
Date Posted: 08 Apr 2010 at 8:03pm

have seen the nut come loose on the pinion shaft will cause it also was told it can be tightened from outside

Posted By: CTuckerNWIL
Date Posted: 08 Apr 2010 at 9:56pm

The most common cause is people grinding the gears. Over time the tooth rounder on the gear becomes a deep bevel and it will not stay in gear. If this is the case, replacement of the shifting collars at least, and worse case would be to replace both gears and collar. After splitting the tractor, you might as well fix it right.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Dale Hardtke
Date Posted: 08 Apr 2010 at 10:28pm

Rear half of a D-14 for sale S.E. Wisconsin (262) 719 3552