A/C D15....what to do???
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10768
Printed Date: 06 Jun 2024 at 11:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: A/C D15....what to do???
Posted By: Dantforth
Subject: A/C D15....what to do???
Date Posted: 08 Apr 2010 at 2:56pm
I purchased my first tractor, a D15, a year ago. I completely redid the back end, hydraulic ram, gaskets, seals, brakes, cleaned and painted and reassembled. I drained all fluids and replaced with synthetics and new hydraulic fluid. Tractor has power steering and a front loader. Everything works and it does not pop out of any gears. All tires are new. Wide front. All repainted with proper paint except for lift arms and bucket. Series 1. Now for the not so good news.... I now hear a noise in the engine when under load. It is a tapping sound and I am suspicious that I may have a bearing noise.
Question - I now have too much money invested and I have lost interest. Do I sell it as it is or invest a further $$$$$$ to do the crank and bearings and possibly re-do the whole engine before selling?
|
Replies:
Posted By: Dave H
Date Posted: 08 Apr 2010 at 3:13pm
|
Seems like it i a question you have to answer.
|
Posted By: JoeO(CMO)
Date Posted: 08 Apr 2010 at 3:19pm
|
the tapping sound under load could be a loose or bent pushrod-num 1 on my checklist
|
Posted By: NICKMI
Date Posted: 08 Apr 2010 at 3:21pm
|
it depends on if your going to sell it or use it if I were to keep it id check into getting the problem fixed either way it sounds like its goin to cost you money id fix it and have a life time of enjoyment out of it if it were me
|
Posted By: EPALLIS
Date Posted: 08 Apr 2010 at 8:50pm
|
Always fix it cause going orange is going great!
|
Posted By: FloydKS
Date Posted: 08 Apr 2010 at 9:00pm
|
Sounds like ( pun intended) the noise is not that bad if it is just a tapping sound...what I am saying is, do not make any decisions untill you know what you are looking at ... or listening to.
|
Posted By: Matt MN
Date Posted: 09 Apr 2010 at 7:26am
Does it loose oil pressure while you are hearing this "tapping" sound? Could also be cam bearings that are making the noise.
-------------
Unless your are the lead horse the scenery never changes!!
|
Posted By: B26240
Date Posted: 09 Apr 2010 at 7:52am
|
I tend to agree with Floyd, check it out futher, how is the oil p. ? put it on the PTO and listen with a $3 stethsope (sp) Mark
|
|