Farm Equipment - D-17 Governor & PS parts

Print Page | Close Window

D-17 Governor & PS parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=107288
Printed Date: 26 Aug 2025 at 9:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-17 Governor & PS parts

Posted By: Stanley
Subject: D-17 Governor & PS parts
Date Posted: 07 Jun 2015 at 7:00pm

I need governor weights, pins & thrust bearing plus some power steering parts - needle bearings, oil seals & drive shaft bearing. Any suggestions who to contact for parts?

Thanks for any help.

Stanley

Replies:

Posted By: norm[ind]
Date Posted: 07 Jun 2015 at 7:03pm

DJS TRACTOR PARTS[MICHIGAN] 734-320-3470 TELL HIM NORM TOLD YOU TO CALL

DAVE IS HIS MANE

Posted By: Stanley
Date Posted: 07 Jun 2015 at 8:03pm

Thanks Norm. I'll call him tomorrow.

Posted By: Brian G. NY
Date Posted: 08 Jun 2015 at 8:35am

Here is some info on the needle bearings and seal.

You may not need this because it appears that DJ's probably handles all the stuff you will require.

Seals (2): A-C #0229372-8 National #450023 I.D. .625" O.D. 1.375 Thick. .406"

Needle Bearings (4): A-C #0800781-7 Torrington #B-108 I.D. .625" O.D. .8135"

Thick. .50"

Ball Bearing (driveshaft) A-C #0229508-7 This is the very common 203S bearing

used in automotive applications.

Not knowing at the time the source Norm refers to, I searched around the internet for my bearings and seals except for the ball bearing which I happened to have "in stock".

Posted By: Brian G. NY
Date Posted: 08 Jun 2015 at 8:40am

Brian-KS posted this in response to your original post.

Brian-KS

View Drop Down

http://www.allischalmers.com/forum/member_profile.asp?PF=12274" rel="nofollow -

http://www.allischalmers.com/forum/pm_new_message_form.asp?name=Brian%2DKS" rel="nofollow -

http://www.allischalmers.com/forum/search_form.asp?USR=Brian%2DKS" rel="nofollow -

http://www.allischalmers.com/forum/pm_buddy_list.asp?name=Brian%2DKS" rel="nofollow -

Silver Level

Silver Level

Joined: Aug 27 2014
Location: Kansas
Status: Offline
Points: 186

Post Options

Post Options

http://www.allischalmers.com/forum/new_reply_form.asp?TID=107114&PN=1&TR=6" rel="nofollow -

http://www.allischalmers.com/forum/new_reply_form.asp?Quote=1&PID=856793&PN=1&TR=6" rel="nofollow -

http://www.allischalmers.com/forum/report_post.asp?PID=856793&FID=2&TID=107114&PN=1" rel="nofollow -

Thanks (0)

Thanks(0)

Quote Brian-KS

http://www.allischalmers.com/forum/new_reply_form.asp?Quote=1&PID=856793&PN=1&TR=6" rel="nofollow - Quote Post Reply

Post Reply

http://www.allischalmers.com/forum/new_reply_form.asp?PID=856793&PN=1&TR=6" rel="nofollow - Reply http://www.allischalmers.com/forum/forum_posts.asp?TID=107114&PID=856793&title=ac-d17#856793" rel="nofollow">

Direct Link To This Post

Posted: Jun 03 2015 at 5:34pm

I think Rick is spot on. I wouldn't run the tractor anymore until fixed. You run the risk of broken material breaking teeth off the governor gear or the camshaft gear. I have a NEW set of weights and pins, left over from a project that changed course mid stream, that I would be willing to sell. PM me if interested.

Posted By: Brian-KS
Date Posted: 08 Jun 2015 at 10:08am

My parts have been sold, thanks

-------------
EAT BEEF!

Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net