Farm Equipment - Cutting Tooth/Edge

Print Page | Close Window

Cutting Tooth/Edge

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10721
Printed Date: 23 Jan 2025 at 10:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Cutting Tooth/Edge

Posted By: Boomer
Subject: Cutting Tooth/Edge
Date Posted: 07 Apr 2010 at 10:54am

Have a WC Speed Patrol, and the cutting tooth/edge for the blade is marginal. One side is worn more than the other by almost one and a half inch. Is there a place to get another set? From my measurements they appear to be the same as the Onyx snap coupler blades. Where does people get the replacements for the snap coupler blade?

Replies:

Posted By: CTuckerNWIL
Date Posted: 07 Apr 2010 at 12:34pm

If I remember right someone mention a Caterpillar part number that matches up with the oxnard blade.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: skipwelte
Date Posted: 07 Apr 2010 at 2:26pm

Cutting edges have a standard hole pattern. They come in 6, 7, 8 ft lenghts, any construction machy dealer espicially if they sell motor graders should be able to hook you up. Just know the length you need. HTH

Posted By: Bill (E.C.MO)
Date Posted: 09 Apr 2010 at 3:57pm

Boomer,

The best and most reasonable source we have found for cutting edges, teeth, etc. (plus undercarriage parts and that sort of thing) is Cohn in Union, MO. Try emailing our salesman Rick at mailto:rfreund@scohn.com - rfreund@scohn.com or calling 800-351-2646

-------------
A-C's currently on the farm: B, CA, 2 D-17 D's, One Eighty, ass't implements.

Posted By: Ron(MN)
Date Posted: 09 Apr 2010 at 9:34pm

Ziegler Equipment is a CAT dealer in Minneapolis where I got a replacement cutting edge for mine Oxnard blade. Part number is 7T-1633 (6 foot). Their phone number is 800-352-2812. There is another one in Altoona, Ia...phone #800-342-7002. Mine cost just over $40.00 a couple years ago.

Good luck,

Ron