Farm Equipment - WD rear rim width

Print Page | Close Window

WD rear rim width

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10716
Printed Date: 23 Jan 2025 at 7:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD rear rim width

Posted By: Osage_Orange
Subject: WD rear rim width
Date Posted: 07 Apr 2010 at 8:43am

Did Allis make more than one width of rear rim for the WD or 45? If so what were they?.........tx...........O_O

-------------
Why is there never time to do it right the first time, but always time to go back and fix it?

Replies:

Posted By: niel ev
Date Posted: 07 Apr 2010 at 8:52am

Parts book show 2 different numbers but not the size but I think they were 11 inches wide and 13 hope this helps Niel

Posted By: TomMN
Date Posted: 07 Apr 2010 at 9:09am

To throw in another wrench, I measured mine recently and they are 12 inches wide. It has 14.9 X 28 tires and they should have 13 inch I thought. Tom

Posted By: Matt MN
Date Posted: 07 Apr 2010 at 9:16am

I believe you could get 10", 11", 12", 13" and later on 15" wide rims.

-------------
Unless your are the lead horse the scenery never changes!!

Posted By: Osage_Orange
Date Posted: 07 Apr 2010 at 2:46pm

I need to measure mine. Tractor has 14.9 X 28 tires.

-------------
Why is there never time to do it right the first time, but always time to go back and fix it?

Posted By: norm [ind]
Date Posted: 07 Apr 2010 at 8:38pm

mostwd's were 10" wd45 12" later ones maybe 13" 13 " an 14.9 tires are a good

set up in my book wide rims are b est we have all in stock 1-800-254-3116

Posted By: Dusty MI
Date Posted: 07 Apr 2010 at 9:19pm

Our '53 WD had 12x26. I thought all WD-45 had 13x26.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"

Posted By: DrAllis
Date Posted: 08 Apr 2010 at 6:20am

All WD's and WD45's had 28 inch spin-out wheels not 26 inch....26 inch spin-outs fit D14/15.....26 inch spin-out wheels hit the final drive on a WD series and you'd have to run the wheels out wide to clear.

Posted By: Dusty MI
Date Posted: 08 Apr 2010 at 6:29am

DrAllis,

Your right, my memory slipped again, too many years.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"