AC #1200 FC
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10713
Printed Date: 31 Oct 2025 at 5:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC #1200 FC
Posted By: BobHnwO
Subject: AC #1200 FC
Date Posted: 07 Apr 2010 at 5:47am
For Sale,AC #1200 Field Cultivator,10 1/2 feet wide,21 shanks,very good condition,$450,Jenera,Ohio.
|
Replies:
Posted By: Skyhighballoon(MO)
Date Posted: 07 Apr 2010 at 12:16pm
|
Bob - are those 6 inch shovels? Yours look to be a VERY nice unit. I wish mine had the proper cast clevis tongue and the paint was as nice as yours. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: CTuckerNWIL
Date Posted: 07 Apr 2010 at 12:23pm
|
What does it take to pull a tool like that?
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Skyhighballoon(MO)
Date Posted: 07 Apr 2010 at 1:01pm
|
I have a 13 foot version of that 1200 FC with worn 4 inch shoves and it's really more than my 180 gas could handle in plowed ground in high 2nd at full throttle...mainly had serious traction issues...worn 16.9X28's at the time. I have new 18.4X30's on it now and looking forward to see if I'm traction or HP limited. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Rawleigh
Date Posted: 07 Apr 2010 at 1:20pm
|
I have a 17 footer with the wings. I put the wings down last year and it stopped my Case 930. Now I just leave them up and use them as weights! LOL! My center section is just like this one. Traction was the problem. I was pulling it pretty deep too. My 18.4-34's are pretty worn out though. I would say you need @70HP and good traction for it. For all 17' of mine, who knows? 100HP? |
Posted By: Dean/MN
Date Posted: 07 Apr 2010 at 2:17pm
| We had a 3pt 10' like yours that we pulled on a series IV 17 and it handled it alright. When we got a 185 we added on 3' and pulled it a little faster. |
Posted By: BobHnwO
Date Posted: 07 Apr 2010 at 4:10pm
| Skyhigh,I thing there is 2 different width sweeps on it,it belongs to my neighbor,I'm just sellin it for him,yes it is in really good cond,he pulled it with a 185. |
Posted By: Shawn PA
Date Posted: 07 Apr 2010 at 5:37pm
|
where is that town close to im from washington pa and might be interested how bout any cracks or has it been welded
Thanks Shawn
|
Posted By: BobHnwO
Date Posted: 07 Apr 2010 at 5:54pm
| 10 miles Southwest of Findlay,Ohio. |
Posted By: BobHnwO
Date Posted: 07 Apr 2010 at 6:10pm
| no breaks or welds,it is in really good condition. |