need an Onan cckb measurement
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=106116
Printed Date: 24 Oct 2025 at 3:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: need an Onan cckb measurement
Posted By: coggonobrien
Subject: need an Onan cckb measurement
Date Posted: 13 May 2015 at 9:01pm
| Could someone tell me how long the linkage is that connects the governor to the carb on the 19.5hp motor |
Replies:
Posted By: HudCo
Date Posted: 13 May 2015 at 10:22pm
| give me a couple days there is a 720 at the scrape yard i am going to get they have allready munched the hood off and the steering wheel and afront spindle but they missed the conrols and all the shrouding and motor i am trading scrape for the tractor and 33cents a pound picking it up for spare parts the cckb did not look hurt |
Posted By: coggonobrien
Date Posted: 14 May 2015 at 5:15am
| Awesome thanks |
Posted By: Steve in NJ
Date Posted: 14 May 2015 at 6:04am
|
Swan dive on that Mike! Good grab!! Homerun there! ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: coggonobrien
Date Posted: 14 May 2015 at 6:48am
| Still amazes me how many have been repowered and yet I still can't find small stuff I need |
Posted By: Steve in NJ
Date Posted: 14 May 2015 at 6:58am
|
Dave, Still lookin' for sheetmetal for that thing? I know what ya mean. They must toss the cckb engine in the trash when repowering the Tractor. You would think there would be a few around... ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: coggonobrien
Date Posted: 14 May 2015 at 7:52am
| I am, I'm at the point if somebody would ship me theirs I would pay for shipping both ways and reproduce it |
Posted By: HudCo
Date Posted: 14 May 2015 at 8:24am
| i called down there on the phone yesterday ( scrape yard) just hope they didd not smash up more stuff setting it out of the way the tin and engine was still un hurt i was really suprised to see it show up i have only seen the one i have616 and and another 720 in real life real rare around here |
Posted By: Steve in NJ
Date Posted: 15 May 2015 at 7:44am
|
Mike, Hopefully by now that thing is in YOUR yard not theirs! LOL! ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: HudCo
Date Posted: 15 May 2015 at 8:11am
| not yet but did drive by there last night and could still seeit there in its sad state |
Posted By: coggonobrien
Date Posted: 15 May 2015 at 8:50am
| Are you going to restore or part it out |
Posted By: HudCo
Date Posted: 15 May 2015 at 8:59am
| just getting it for parts i want the duel hyd valve and control for my 616 and starter soliniod my soliniod willl put the drive in but wont conect through to the motor most of the time |
Posted By: coggonobrien
Date Posted: 15 May 2015 at 12:35pm
|
awesome, let me know when you get it, i'd be interested in buying some light parts off of you. |
Posted By: HudCo
Date Posted: 15 May 2015 at 7:42pm
|
going to try fof tomorrow or monday |
Posted By: Steve in NJ
Date Posted: 18 May 2015 at 6:08am
|
Hey Dave! Did you git' your carb linkage measurement yet? I just got to the back of the garage over the weekend, and got my engine out from under the back bench. Picked it up with the engine crane and got it put on the work table so I can finish putting it back together. Whatever measurements ya need, I can help ya out... Steve ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: coggonobrien
Date Posted: 18 May 2015 at 6:50am
|
Awesome Steve, could you tell me how long the linkage is that connects that governor ball to the ball on the carb? also if there's any chance you could get me a clean picture of the fan shroud so I can see the throttle/choke cable clamp, and the throttle pivot to the governor all hooked up that would be awesome. Thanks!
|
Posted By: BrianC
Date Posted: 18 May 2015 at 10:17am
|
I t measures 4.38 inches on this machine. I attach some pictures.     |
Posted By: coggonobrien
Date Posted: 18 May 2015 at 10:43am
| dear lord that is clean. Thanks! |
Posted By: BrianC
Date Posted: 18 May 2015 at 12:55pm
|
I have had that machine for 2 1/2 years now. It has an electric fuel pump and vertical exhaust. I should post a full picture, it is pretty. |
Posted By: coggonobrien
Date Posted: 19 May 2015 at 11:48am
|
post the picture of the whole machine, any chance you could get a closer picture of the cable clamps down on the shroud? Thanks |
Posted By: coggonobrien
Date Posted: 03 Jun 2015 at 7:08pm
| Brian could you post one more picture of where the 2 cables are held to the shroud? thanks! |