Farm Equipment - CA brake spring and decal question

Print Page | Close Window

CA brake spring and decal question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10600
Printed Date: 10 May 2024 at 1:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA brake spring and decal question

Posted By: Reeseholler
Subject: CA brake spring and decal question
Date Posted: 04 Apr 2010 at 9:24pm

Hello,

I just put new brakes on my CA, and for the brake spring I know the one end loops over the adjusting bolt, but does the other end hook around the square hole in the casting in front of the brake drum? And also, for a 1953 model, it would have the straight decal right? not one with the left side of the "A" in allis going down farther than the rest of the letters.

Replies:

Posted By: Chris/CT
Date Posted: 05 Apr 2010 at 6:47am

I have a set of CA Decals from Maple/Hunter Co I need to sell, let me know if interested,

Posted By: Pipe
Date Posted: 05 Apr 2010 at 7:21am

Yes the brake spring sticks threw and hooks on the slotted hole in the front side of the brake housing Decals I am not sure on .

Posted By: CTuckerNWIL
Date Posted: 05 Apr 2010 at 7:51am

Decals should be black with A and S the same size as the other letters.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Reeseholler
Date Posted: 05 Apr 2010 at 2:53pm

Thanks

Posted By: Larry in OK
Date Posted: 05 Apr 2010 at 9:58pm

If you can get a helper, putting on the new spring is a pretty easy trick. I had an old heavy long screwdriver with a messed up tip. I cut a small slot in it and ran it through the spring and pushed the hook down to the slot. My helper then hooked the hook and pulled it into place.