Farm Equipment - 207430+910324 MIA

Print Page | Close Window

207430+910324 MIA

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10589
Printed Date: 22 Jan 2025 at 10:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 207430+910324 MIA

Posted By: morton(pa)
Subject: 207430+910324 MIA
Date Posted: 04 Apr 2010 at 7:34pm

Yeah, I thought that title might turn a few heads. Anyway, in case you didn't take the time to look them up, I am missing a Clip (90 degree angle one that pulls the mag into the gov.) and one of the nuts to put the magneto back on one of the B's. I "borrowed" a set from a different tractor for now but I will need to replace them at some point. Anyone know of any sources for these parts? Hopefully I can find them because I'm getting the feeling that they might be costly, at least the clip, to replace. Is the nut just a standard or will I need to special order that? Didn't get the time to look.

Replies:

Posted By: B26240
Date Posted: 04 Apr 2010 at 7:39pm

morton I would think you could make the clip out of a piece of flat strap, drill 3/8 hol then put in vice and hammer over to 90* HTH Mark L

Posted By: morton(pa)
Date Posted: 04 Apr 2010 at 7:49pm

I've thought about that. I wasn't sure if it would be too precise of a part to do, but I guess it wouldn't hurt to try.

Posted By: Chalmersbob
Date Posted: 04 Apr 2010 at 8:34pm

Morton, You have one to use as apattern. The nut is a standad hardware store item. You need a flat and lock washer also. Bob