wheelybars
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=105030
Printed Date: 25 Nov 2024 at 1:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: wheelybars
Posted By: Ronnie
Subject: wheelybars
Date Posted: 20 Apr 2015 at 1:41pm
Can u guys share some pictures of wheelbars for a 190 or 200. I was just informed that all tractors got to have them to pull with my club due to inserence reasons. Thanks 
|
Replies:
Posted By: DrAllis
Date Posted: 21 Apr 2015 at 8:18am
| All depends on how much of your original drawbar and 3 point hitch you are leaving on the tractor. You could attach to the side of the torsion bar framework where the sway blocks attach to, if that stuff is still there. |
Posted By: Ronnie
Date Posted: 21 Apr 2015 at 11:07am
| Well I have the pto and the drawbar but no 3point arms or sway blocks and the drawbar is adjustable |
Posted By: DrAllis
Date Posted: 21 Apr 2015 at 12:37pm
| Well then, attach to where the sway blocks went. Make sure they extend back as far as the rear tire diameter and no more than 9 inches off the ground and capable of supporting the weight of the tractor. Maybe make them adjustable in height for loading/unloading from a trailer. |
Posted By: 2wise4agm
Date Posted: 21 Apr 2015 at 8:20pm
| If you will send me your email I can send you some pics of mine that I have on my phone. |
Posted By: Ronnie
Date Posted: 21 Apr 2015 at 8:46pm
| Sent u a pm 2wise4agm |
Posted By: 2wise4agm
Date Posted: 22 Apr 2015 at 4:43pm
http://s1276.photobucket.com/user/2wise4agm/media/2FB00817-3076-49BF-A524-98C15F9C7E38_zpsoscwdyrn.jpg.html" rel="nofollow"> [/IMG]
|
Posted By: Beirnesy
Date Posted: 22 Apr 2015 at 8:13pm
|
A question for 2wise4agm: Are the u-bolt axle hubs AC specific/ or will another tractor brand work on the AC axle? I am not having any luck finding a set and I prefer not to weld on a 9 bolt hub and cut off axle stub. Thanks ------------- 1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716 |
Posted By: 2wise4agm
Date Posted: 22 Apr 2015 at 8:17pm
| I found my hubs and wheels in a salvage yard. They are not AC specific. Don't remember who mine are made by, but they are aftermarket. |
Posted By: 7040
Date Posted: 23 Apr 2015 at 12:36am
| Beirnsy what part of the country are you in I have one good one and one that I tore the key off mine were dmi brand.i have been told it is repairable. I switched too weldonhubs. Also I was told Oliver used a lot of that size hub not sure if that's true. |
Posted By: Beirnesy
Date Posted: 23 Apr 2015 at 5:06pm
I am in SW Ontario, I have thought of the Oliver style, the Oliver keyway is tapered. My Oliver collecting neighbours say I could grind keyway square. ------------- 1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716 |
7040 wrote:Posted By: Larry(OH)
Date Posted: 24 Apr 2015 at 5:39am
|
Check these guys out. Real nice stuff http://www.capbrosmotorsports.com/index.html ------------- '40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie *ALLIS EXPRESS contact* I can explain it to you, BUT I cannot understand it for you!! |