Farm Equipment - D-17 pto shaft bearing

Print Page | Close Window

D-17 pto shaft bearing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10477
Printed Date: 22 Jan 2025 at 7:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-17 pto shaft bearing

Posted By: Kevin
Subject: D-17 pto shaft bearing
Date Posted: 02 Apr 2010 at 5:13pm

I was getting ready to install the pto shaft in the tractor when I noticed that the bearing (inner race) would spin on the shaft..I removed the snap rings and lightly tapped it with hammer and slid it off.. is this normal.. would any one have the timken number for it.. I want to see if may have spun on the shaft.. being undersized now.. thanks

Replies:

Posted By: Gary(OR)
Date Posted: 02 Apr 2010 at 9:46pm

I have a pto shaft settin in the shop, so I gave it a quik check....has an MRC 207M bearing that fits tight. I imagine a light press fit that would need to be driven off or pressed.