616/620/720 mower deck roller dissassembly
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=104685
Printed Date: 26 Nov 2024 at 10:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 616/620/720 mower deck roller dissassembly
Posted By: coggonobrien
Subject: 616/620/720 mower deck roller dissassembly
Date Posted: 12 Apr 2015 at 7:51pm
|
just wondering how you remove by sets of rollers. Thanks! David |
Replies:
Posted By: DSeries4
Date Posted: 12 Apr 2015 at 8:43pm
|
Referring to the picture below, remove each shoulder bolt that is above the roller assembly. Also remove the bolt directly above. The shaft is welded to the upright on the right side, so you start pulling on that upright to get everything apart. If you are rebuilding, I'd recommend welding on a new shaft as the original is probably well worn. Did mine a few years ago. Had my fab shop make up new uprights as well since mine were worn too. http://s526.photobucket.com/user/szalmyr/media/620/DSC03388_zpsrhjxvszo.jpg.html" rel="nofollow">  ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Tracy Martin TN
Date Posted: 12 Apr 2015 at 9:45pm
|
I made those over also. Mine were worn too. I made new deck adjusting Tee handles also. Take out all the lost motion as much possible.Tracy ------------- No greater gift than healthy grandkids! |
Posted By: coggonobrien
Date Posted: 13 Apr 2015 at 5:18am
| cool thanks, how about the small roller inside the shell? |
Posted By: ACJohn
Date Posted: 13 Apr 2015 at 8:43am
| IIRC, you have to unbolt the brackets for the roller behind the center blade. |