Pulling Forum - Arp head studs

Print Page | Close Window

Arp head studs

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=104676
Printed Date: 25 Nov 2024 at 1:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Arp head studs

Posted By: Zaddison
Subject: Arp head studs
Date Posted: 12 Apr 2015 at 3:23pm

I ordered arp head studs for my wc. I didn't want to as they are kinda pricey. However mine where all miss matched and the 3/8 studs where just bolts for what ever reason i dont know but I didn't like it and when I stared makin alittle more power I kept blowing head gaskets which is also pricey. Im wondering what I should toruqe those new studs to? As it didn't come with any paper work.

Replies:

Posted By: mgburchard
Date Posted: 14 Apr 2015 at 1:32pm

The same as allis factory specifies

Posted By: bigcountry48
Date Posted: 14 Apr 2015 at 8:19pm

If you think those are pricey you should try ordering a set from agco!!! Oh my gosh they were expensive, and it was the wrong set so I ended up ordering arp bolts anyways which was way cheaper! Just torque them to factory specs. If you don't already have one a manual has all that in it which would really be helpful.

-------------
1950 B, 1952 pulling wd, and 1954 wd45