AC130 Front Wheel Bushings
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=104536
Printed Date: 26 Nov 2024 at 10:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC130 Front Wheel Bushings
Posted By: NCAllisnut
Subject: AC130 Front Wheel Bushings
Date Posted: 09 Apr 2015 at 8:45am
|
I let the front hubs on my AC130 get dry, and the bushings are shot along with both spindles. I have part numbers for the spindles, but the front wheel bushings are not sold separately. Has anyone matched these up to Simplicity bushings, of found a replacement somehwere else? I really don't want to buy front tires and rims to get the bushings! ------------- www.facebook.com/AdamDavisWoodworking |
Replies:
Posted By: farmtoybuilder
Date Posted: 10 Apr 2015 at 7:51am
|
Did you get old ones out of rims? If so measure OD and ID and let us know. Most lawn mower shops have them in stock and can order odd sizes of them. Or you could buy new rim with replacement brgs. instead of bushings! ------------- 5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them. |
Posted By: NCAllisnut
Date Posted: 10 Apr 2015 at 8:27pm
|
Simplicity's customer support folks gave me a part number - 1752171 - for the wheel bushings. I'll find a local, hopefully competent, dealer and order them. ------------- www.facebook.com/AdamDavisWoodworking |
Posted By: NCAllisnut
Date Posted: 13 Apr 2015 at 12:49pm
|
One more follow up - Simplicity says the replacement bushing is part number 1752171. They also offer a bearing instead of a bushing, part number 7028722. Hopefully this will help someone sooner or later. ------------- www.facebook.com/AdamDavisWoodworking |
Posted By: NCAllisnut
Date Posted: 24 Apr 2015 at 7:20pm
 The part number above for ball bearings worked perfectly. By the way, it take 49 strokes of my grease gun to fill the front hubs. ------------- www.facebook.com/AdamDavisWoodworking |
Posted By: NCAllisnut
Date Posted: 24 Apr 2015 at 7:23pm
 ------------- www.facebook.com/AdamDavisWoodworking |
Posted By: NC Bruce
Date Posted: 27 Apr 2015 at 10:28pm
|
Good to hear from you, Buddy! Are you still working in Columbus? My Daddy ALWAYS ask if you checked the oil and GREASED the tractor and all equipment. You knew it was his first question when he saw you! Ha! Probably why I still have some of his AC equipment around, in use..... an AC Friend, Bruce |