Farm Equipment - Woods Mower Mounting Question

Print Page | Close Window

Woods Mower Mounting Question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10416
Printed Date: 22 Jan 2025 at 4:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Woods Mower Mounting Question

Posted By: PA Bill
Subject: Woods Mower Mounting Question
Date Posted: 01 Apr 2010 at 4:40pm

A guy not far from me has a Woods L59 mower he took off of a B that he'll make me a good deal on. Comes with all the brackets off the B.

I'd like to use it on my CA. Will the brackets off the B work to mount the mower on the CA or will I have to get new ones?

Thanks.

Replies:

Posted By: RyanTN
Date Posted: 01 Apr 2010 at 4:49pm

Bill, A CA has a wider distance between the finals. You will need to lengthen or replace that mount. I think everything else should work. Here is a link to the manuals on the Woods site to double check. The ones you want are "L59CA, L306CA" and "L59 AC B&C..."

http://www.woodsonline.com/manuals.aspx?id=11629#ctl00_contentMain_Directory1 - http://www.woodsonline.com/manuals.aspx?id=11629#ctl00_contentMain_Directory1

Posted By: norm [ind]
Date Posted: 01 Apr 2010 at 7:53pm

for best results but the correct one from woods

Posted By: morton(pa)
Date Posted: 01 Apr 2010 at 8:39pm

Depending on which style mounting brackets he has, it may or may not work. I know there are some mounting brackets are interchangeable with the B and C, but I'm not sure about the CA. Better check the measurements on them first. Some are adjustable, others are not.

Posted By: CTuckerNWIL
Date Posted: 01 Apr 2010 at 8:59pm

I have an L59 that has a 3 part adjustable bracket for the "push bar" . Either end has a flange that bolts to the finals, and the center piece has the idler pulleys and connects the 2 outside pieces together. This is a factory set up from Woods. I used it on the 51 CA until 3 years ago, and now have it on my 38 B. If the "push bar" is one piece it will not swap out.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF