341 C.I. Piston and Sleeve
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=103407
Printed Date: 25 Nov 2024 at 1:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 341 C.I. Piston and Sleeve
Posted By: O.P.S. Heads
Subject: 341 C.I. Piston and Sleeve
Date Posted: 17 Mar 2015 at 10:09pm
|
New engine kit ready to ship. No block boring required for the 341 inch kit. Drop in and go. 
|
Replies:
Posted By: mattb
Date Posted: 18 Mar 2015 at 9:24am
| how much? |
Posted By: Peterson
Date Posted: 18 Mar 2015 at 9:50am
|
Whats the compression ratio? ------------- 7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2 |
Posted By: O.P.S. Heads
Date Posted: 18 Mar 2015 at 1:23pm
|
Send me an email at opsheads@hotmail.com and I can send you a price sheet. Static compression ratio is around 14:1 depending on valve recess. That can be raised or lowered if need be. |
Posted By: bmartin55
Date Posted: 20 Mar 2015 at 9:54pm
| O.p.s.heads ..I sent u a email ..need to hear something. .thanks.bob martin.. bmartin5566@yahoo.com. . |
Posted By: WF owner
Date Posted: 21 Mar 2015 at 6:56am
|
I hate to ask a stupid question, but I assume these are overbore kits for the 301 (2800/2900)? Are these rebuild kits strictly for pulling or are they for field tractors, too? |
Posted By: O.P.S. Heads
Date Posted: 21 Mar 2015 at 7:57am
|
Designed to fit directly into a 301 block and yes for pulling engines. |