8010 help!!!
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10298
Printed Date: 22 Jan 2025 at 11:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8010 help!!!
Posted By: clint
Subject: 8010 help!!!
Date Posted: 29 Mar 2010 at 9:00pm
|
the volt light came on- alt was squealing- took to town- tested at 11volts- was an delco with only the one wire wired- the prongs were sealed by a rubber piece- was working fine until the other day
they tested the new one with just the one wire- 12 volts with the prongs hooked- 15
with the prongs hooked on mine- still 11
i took the new one home- light still on- maybe needs to run for a while? i had it running about 20 minutes?
what else could be wrong? a voltage regulator? where is it on the tractor?
-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62
|
Replies:
Posted By: clint
Date Posted: 30 Mar 2010 at 7:25am
|
bump
the alt on it was 1105 631 replaced with the same
-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62
|
Posted By: clint
Date Posted: 30 Mar 2010 at 7:31am
the agco dealer says 1105 423 is the proper one- what is the difference?
-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62
|
Posted By: tbran
Date Posted: 30 Mar 2010 at 8:10am
|
SOMEONE replaced the oem alt with a one wire which is ok, the plug keeps one from trying to plug in wires, however the prongs are there it is just connected to the rt terminal 12v and the other is diode switched; the reason it was squealing was belt was loose, battery or wire is bad and calling for max output is my guess. Of course the alt only put out 12 v w/o wires connected that is what it is supposed to do. The reason the light is on is probably the reason the alt you pulled off was squealing - the batt is not taking a charge or is shorted? Just a possibility from experience.
|
Posted By: tbran
Date Posted: 30 Mar 2010 at 8:13am
|
forgot to reply - the voltage regulator is internal - in the alternator
|
Posted By: clint
Date Posted: 30 Mar 2010 at 8:16am
tbran- would it hurt anything to plug the wires in the alt?
-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62
|
|