Pulling Forum

Print Page | Close Window

turbo

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=102967
Printed Date: 24 Nov 2024 at 11:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: turbo

Posted By: 200 allis
Subject: turbo
Date Posted: 09 Mar 2015 at 9:21am

Has anyone used Hx 35 hybrid turbo on 301

Replies:

Posted By: Ronnie
Date Posted: 09 Mar 2015 at 9:54am

I am runing a hx35 on my 301 and so far it is working fine for pulling.it is a 190 with home made up pipe to go up the factory hole but if u don't care bout ur hood u just got to move the hole back

Posted By: Ronnie
Date Posted: 09 Mar 2015 at 9:56am

O I forgot I made the intake pipe to all steal very little rubber

Posted By: 200 allis
Date Posted: 09 Mar 2015 at 10:23am

I run a hx35 was wondering about the hybrid that useshx40 compressor and hx35 exhaust

Posted By: O.P.S. Heads
Date Posted: 09 Mar 2015 at 10:42am

It would be interesting to see how one works. I am always leery of putting a bigger compressor wheel on any turbo for fear of it being "sneezy", but sometimes it works I guess. You might consider finding a complete HX40 turbo with the 60mm - 7 blade compressor wheel. I think that is the wheel the use for the 35 hybrid. The HX40 turbine wheel and shaft will fit into the 35 bearing housing, but them you have to machine your existing exhaust housing or buy a housing for the 40 wheel.

If you are at 3,000 RPM and your smoke is see through at full load you won't gain much. If it is heavy then you might.