Print Page | Close Window

sheet metal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10272
Printed Date: 22 Jan 2025 at 9:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: sheet metal
Posted By: ACscott
Subject: sheet metal
Date Posted: 29 Mar 2010 at 2:47pm
is the sheet metal on the d14 the same as the d15 like the side panels under the gas tank and the front grill assembly. thanks in advance



Replies:
Posted By: snowman(MI)
Date Posted: 29 Mar 2010 at 8:00pm
Don't know about the side panels, but the front nose cone and grille is different between the 14 and 15, with the 15 being wider.


Posted By: DSeries4
Date Posted: 29 Mar 2010 at 9:29pm
A Series I D15 is the same I believe (except for the diesels).  But as mentioned above, the series II is wider.  Panels under the gas tank would probably be the same though.


Posted By: JoeO(CMO)
Date Posted: 30 Mar 2010 at 7:02am
All D15's are wider than the D14



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net