616-620 mower deck spindles
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=102713
Printed Date: 26 Nov 2024 at 8:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 616-620 mower deck spindles
Posted By: Tracy Martin TN
Subject: 616-620 mower deck spindles
Date Posted: 02 Mar 2015 at 9:14pm
I need a couple of good mower deck spindles for the 616-620 mower deck. Thanks Tracy
-------------
No greater gift than healthy grandkids!
|
Replies:
Posted By: HudCo
Date Posted: 09 Mar 2015 at 12:27pm
|
is there a modal or seriel number ? how wide ? how many blades? on the deck i will look and look and see if it crosses in the aftermarket world probley other manufacturers also used the same one also.
|
Posted By: Tracy Martin TN
Date Posted: 09 Mar 2015 at 12:58pm
The deck is 60 inches of cut. The blades are 20.5 inches long. Three blades. It is the mid mount 60 inch deck, for the 616-620-720. HTH Tracy
-------------
No greater gift than healthy grandkids!
|
Posted By: HudCo
Date Posted: 09 Mar 2015 at 9:55pm
|
the best i am coming up with so far is changing the oe #s to new #s and i can not find a new number for the center shaft but i think the housing #s may be murray #492574
|
Posted By: Tracy Martin TN
Date Posted: 09 Mar 2015 at 9:59pm
HudCo what is the price of housings? Thanks Tracy
-------------
No greater gift than healthy grandkids!
|
Posted By: HudCo
Date Posted: 10 Mar 2015 at 9:41pm
|
there alot of spinldes out there without seeing or measureing i think murray 92574 is the right one with bearing and no shafts about 30.00 each hope your center shaft is good its differant than the other two and prob. be harrd tofind but go to your local mower shop that sells rotary products and look at item 2925 but look at all the differant choices and prices this one is greaseable and a 20 inch blade is not to much to swing unless you are useing it for abrushhog the catalog has alot of dimensions
|
Posted By: ACmowerguy
Date Posted: 10 Mar 2015 at 10:49pm
That murray spindle looks a bit light for the application. The bearings are probably pretty small. What about the height also?
-------------
10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments
|
|