Pulling Forum - Un-styled WC

Print Page | Close Window

Un-styled WC

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=102592
Printed Date: 24 Nov 2024 at 11:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Un-styled WC

Posted By: David Terry
Subject: Un-styled WC
Date Posted: 28 Feb 2015 at 6:22am

Does anyone know if you can put a D17 Series III in to an Un-styled WC chassis? I can get a rebuilt motor and that would be easier than trying to rebuild an old gleaner I have. Thanks, Dave

Replies:

Posted By: DrAllis
Date Posted: 28 Feb 2015 at 6:58am

Any D-17 gas engine can be made fit into a WC tractor. Use the WC flywheel and clutch, water pump and crankshaft pulley( bore the pulley for a thru hole). The one oil line from the filter base to the block may have to be repositioned to clear the steering wheel shaft.

Posted By: David Terry
Date Posted: 28 Feb 2015 at 7:21am

Dr. Allis,

I am on the cusp of going for it. I have a gleaner engine, but it isn't complete and I'd have just about as much in the gleaner as I would buying the rebuilt D17.

Dave

Posted By: cotncrzy
Date Posted: 01 Mar 2015 at 7:32am

I have a Nice one built up for sale, sitting in a crate ready to go! Custom cam, flat tops, all the modifications have been made. Literally ready to bolt in and crank. Has about 5to 10 hours on it. STRONG ENGINE!

-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!