Kohler block
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=102513
Printed Date: 26 Nov 2024 at 7:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Kohler block
Posted By: Steve in NJ
Subject: Kohler block
Date Posted: 26 Feb 2015 at 5:14pm
Hey guys! Anybody out there have a good K341 empty block or short block? (16HP) Puttin' the feelers out for my nephew. Block cracked in his 716H while plowin' snow this past Sunday. Bummer! We're lookin' round'. TIA!!
Steve@B&B
customcircuits@gmail.com
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Replies:
Posted By: Coke-in-MN
Date Posted: 26 Feb 2015 at 6:11pm
|
I have 2 of them complete , one has rod that the dipper on the end broke when balance gear broke - have new gear for that one , other was bored over size a while back and had new crank - also couple extra starters for them - make a package offer -
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Posted By: Steve in NJ
Date Posted: 27 Feb 2015 at 5:21am
Coke,
Thanks for the quick return! I'll git' back to ya on them! Let me see what the nephew has found somethin' first. Thanks man!
Steve@B&B
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: Coke-in-MN
Date Posted: 27 Feb 2015 at 9:19pm
Both are from New Holland Tractor - general service engine so the crank in full size 1 1/8" if i remember the size right - the crank end is larger than used on JD or some other tractors.
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Posted By: Steve in NJ
Date Posted: 02 Mar 2015 at 8:30am
Bummer. Might not be able to use em'. We'll keep pokin' around. Thanks anyway Coke!!
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: EdW
Date Posted: 02 Mar 2015 at 3:35pm
I have a K341 bare block that came out of a 716. I would take$50.00 plus the ride
-------------
EdW
|
Posted By: HudCo
Date Posted: 02 Mar 2015 at 6:14pm
|
look real close for a cracked or broken cam they have that pin in them and the cam can bust in half on a angle and split the block and fit back in place and still run if it spins the right amount of times or did it ventalate
|
Posted By: Steve in NJ
Date Posted: 03 Mar 2015 at 8:42am
Hud,
Didn't make a window in the block, just cracked it where it mounts. Its my nephews, and he lives in MD. He hasn't checked it out yet. To cold to play in the garage yet. LOL! He did say the crack is on the fuel pump side of the engine. I thought maybe drive gear or cam? Not sure. BTW, he said it was still running when he saw it and quick shut it off..
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: HudCo
Date Posted: 03 Mar 2015 at 8:49am
|
thats a new one must have got sm thing under one foot
|
|