Farm Equipment - thread locker on rod bolts????

Print Page | Close Window

thread locker on rod bolts????

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10228
Printed Date: 22 Jan 2025 at 6:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: thread locker on rod bolts????

Posted By: tractorboy
Subject: thread locker on rod bolts????
Date Posted: 28 Mar 2010 at 8:08pm

I asked at napa for the pal locking nuts, he had none. What do you guys use to make sure the rod bolts stay tight?? PS, I'll be putting the engine back in the B, and will use a 3/16 plate to give me clearance between the clutch shaft and the crankshaft. I know this is unheard of, but it's ouick and easy! Keith

Replies:

Posted By: CTuckerNWIL
Date Posted: 28 Mar 2010 at 8:15pm

Wire

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Gerald J.
Date Posted: 28 Mar 2010 at 8:30pm

McMaster-Carr www.mcmaster.com has Palnuts.
http://www.mcmaster.com/#palnuts/=6f5rxg

Not expensive either, if they have the size you need, I hope 3/8" fine thread.

Gerald J.