Farm Equipment - D19 Bull Pinion

Print Page | Close Window

D19 Bull Pinion

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10215
Printed Date: 22 Jan 2025 at 9:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D19 Bull Pinion

Posted By: JCinPA
Subject: D19 Bull Pinion
Date Posted: 28 Mar 2010 at 6:04pm

Need help fellas. I'm lookin for a Bull Pinion For My D19. Any leads would be appreciated. Thanks in advance. JCinPA

Replies:

Posted By: DSeries4
Date Posted: 28 Mar 2010 at 9:49pm

Would one from a 190 work? Just curious.

Posted By: Lonn
Date Posted: 28 Mar 2010 at 9:54pm

I think the early straight 190 would work or an early xt gasser. Diesels xt's had a field installed updated rear end.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: DSeries4
Date Posted: 28 Mar 2010 at 10:19pm

The gears on my XTD are flaking a little bit. I am planning to rotate them so that the backside gets used. There is still lots of metal there.

Might be sometihng for you to consider too if they are not too worn.

Posted By: JCinPA
Date Posted: 29 Mar 2010 at 4:38pm

I have been told that the bull pinion from a One Ninty will work but need to be carefull to get same tooth count or replace both sides. I'm gonna look it over close to see if reversing is an option. Thanks for the sugestions JCinPA

Posted By: Gary IN
Date Posted: 29 Mar 2010 at 8:33pm

Have a parts D-19 trans and rearend good. North East Indiana. if you can't find one closer. Gary IN