Garden Tractors - 4041 Help

Print Page | Close Window

4041 Help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=101120
Printed Date: 26 Nov 2024 at 6:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 4041 Help

Posted By: Tony.Or
Subject: 4041 Help
Date Posted: 28 Jan 2015 at 4:16pm

Have a chance to buy a 4041 runs good but bad rear end . comes with loader, tiller, blade , backhoe.

Whats the good & bad ??? Also can get a 4040 cheap -- Parts machine. will parts enter change. Thanks Tony

-------------
http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com

Replies:

Posted By: Steve in NJ
Date Posted: 29 Jan 2015 at 6:45am

Should be able to part either one of those machines out TC. Folks are always looking for a good running Onan for a replacement engine. I believe the 4041 Simplicity is the same machine as the 620/720 AC's. Parts I would think should interchange along with the implements. Not sure about the 4040 and what will interchange wit' dat one. Not familiar wit' dat model machine...
Short Round

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Posted By: fasstman
Date Posted: 30 Jan 2015 at 4:56pm

Rear ends should interchange. I would like to get a loader and backhoe for my 720. Are you going to get them? I might be interested in some parts and pieces. If you want to sell some.

Posted By: Tony.Or
Date Posted: 30 Jan 2015 at 5:37pm

Will keep you posted .. TC

-------------
http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com

Posted By: SchottEquipment
Date Posted: 09 Feb 2015 at 2:30pm

the parts will interchange, except for the intakes and crabs on the motor.

the 4040/616 was a 16hp, the 4041/620, and the 9020/720, were a 19.5hp.

the rest of the drive lines can be switched between models.

Posted By: Dusty MI
Date Posted: 14 Feb 2015 at 11:26am

I'd like to find a back hoe for my 720.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"