Pulling Forum - wd flat tops in d17 for pulling

Print Page | Close Window

wd flat tops in d17 for pulling

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=101026
Printed Date: 04 May 2024 at 1:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd flat tops in d17 for pulling

Posted By: 40wc47puller
Subject: wd flat tops in d17 for pulling
Date Posted: 26 Jan 2015 at 7:16pm

I was thinking of putting together a d17 enigine with wd flat top pistons worked head and intake. has anyone ran this combo and would 175 cam. specs work well .pulling in wc in 3500-4000 lbs 4-5 mph

Replies:

Posted By: mike a
Date Posted: 26 Jan 2015 at 10:06pm

175 gov.spring,motec reworked carb,15.5x38 rubber,adjustable pullin hitch=FUN!

Posted By: 40wc47puller
Date Posted: 26 Jan 2015 at 11:43pm

Thanks..I'm sick of finishing second.only pull local pulls and the stock 201 ran strong. problem is a farmall h stripped to get into. 3500 lb class

Posted By: mike a
Date Posted: 27 Jan 2015 at 11:25pm

you will pull the crap out of that H with this set-up,but hey don't take my advice,find out for yourself-my competition did.good luck!

Posted By: 40wc47puller
Date Posted: 28 Jan 2015 at 3:06am

Dad beat him on 47 and all it has is m and w kit but it was close. Our 40 was stick just turned up and it was always just feet from the farmall. I can't wait to pull this year .

Posted By: mike a
Date Posted: 28 Jan 2015 at 6:29pm

i like to beat-up my brother-in -law(on his M that is!)