Construction and other equipment

Print Page | Close Window

hd-5

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10096
Printed Date: 11 Apr 2025 at 6:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: hd-5

Posted By: jturano11
Subject: hd-5
Date Posted: 26 Mar 2010 at 4:57pm

the boot on my hd-5 transmission for the plunger to lock my transmission in gear is not in usable condition, it is ripped badly and is leaking horribly.
anyone know where I can buy a new one or a suggestion as to what I can do?

Replies:

Posted By: Coke-in-MN
Date Posted: 26 Mar 2010 at 5:10pm

If you find a source , let me know .

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: gemdozer
Date Posted: 26 Mar 2010 at 5:14pm

I should have some new boots locking plunger.

mailto:gemdozer@hotmail.com - gemdozer@hotmail.com

Posted By: Tom6070
Date Posted: 28 Mar 2010 at 8:06pm

I've got a neighbor parting out an old style HD-5 with straight blade. It hasn't run for 30 years but it has been covered up. He is in NE Indiana. He'd likely sell some parts if anyone is looking. I believe the tracks are shot as is the engine. Transmission and gears might be ok.

Posted By: DonBC
Date Posted: 29 Mar 2010 at 11:02am

I don't know the shape and size of your boot but I have used the boot for the CV joint for a front wheel drive car as a gear shift lever boot.

-------------
Jack of all trades, master of none

Posted By: Ages Cat
Date Posted: 29 Mar 2010 at 4:35pm

Do you know what kind of blade it is? Are the cylinders mounted on either side of the radiator? I have several bare tractors which don't have blades. thus the reason for my reply.

Posted By: CAL(KS)
Date Posted: 30 Mar 2010 at 12:03pm

i used a universal boot from my local carquest on my HD16 shifter. just cut to fit.

Posted By: Coke-in-MN
Date Posted: 30 Mar 2010 at 1:42pm

this a a boot about 4" long aprox 1" on trany end and 5/16" at the rod end.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: jturano11
Date Posted: 30 Mar 2010 at 2:01pm

that is a different boot

Posted By: jturano11
Date Posted: 30 Mar 2010 at 2:03pm

that is the one

Posted By: jturano11
Date Posted: 30 Mar 2010 at 2:05pm

4inches in diameter

Posted By: gemdozer
Date Posted: 30 Mar 2010 at 5:48pm

The hd5 boot for locking plunger is 2 " loog and part number 080166 and 049966

Posted By: Matt (Jordan,MN)
Date Posted: 30 Mar 2010 at 6:06pm

I don't have any boots on hand but i can get them. Email me at mailto:mbscott881@frontiernet.net - mbscott881@frontiernet.net if your interested. Also send me your serial number since there are two different boots. Thanks Matt

Posted By: JimNEIN
Date Posted: 30 Mar 2010 at 7:53pm

I got an hd5 that I haven't had running in 4 years.Should pull and try to start it.Been thinking about scrapping it with the price of steel now.

Posted By: 190Guy
Date Posted: 30 Mar 2010 at 9:55pm

I can get you a new boot for your trans on your HD5. I will look up the price. Let me know if you are interested. Email mailto:snydereq@verizon.net - snydereq@verizon.net or call 1-330-223-1913 Thanks, Ray I can also get other parts New and used for AC Crawlers