WC Tires
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=100795
Printed Date: 24 Nov 2024 at 10:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WC Tires
Posted By: NDBirdman
Subject: WC Tires
Date Posted: 21 Jan 2015 at 10:31pm
|
Tires on my WC are in severe need of change, mismatched/rotten. I plan on attending a couple tractor pulls with it after I get the head gasket replaced. I have found a good set of 11.2 X 26, is that a good size for all around use and some tractor pulls? Tires are supposed to be stock size or one size bigger allowed.
------------- 1955 WD45 S#205467, 190XT #6652 DXT |
Replies:
Posted By: 1955allisca
Date Posted: 22 Jan 2015 at 6:04am
| That's aweful small, a good WC will turn 16.9-26s no problem id say 13.6 26s would be better i run 14.9 and 16.9s on mine |
Posted By: Pipe
Date Posted: 22 Jan 2015 at 7:42am
| I am pretty sure that one size over would be 14.9 and wc came with 24,28 and 36.Might what to check the rules on Od. size before you get 26 inch tires. 13.6x28 might be the way to go depends on what kind of track you have clay or sand. |
Posted By: BennyLumpkin
Date Posted: 22 Jan 2015 at 10:15am
|
13.6x28 is a good size to pull with on a WC. That's what I ran until I went to 38's ------------- Central PA Allis Express 1934 WC254 1945 WF 1945 WC135755 1951 WD68085 1953 WD45-150217 1957 WD45D-230744D B110 |
Posted By: NDBirdman
Date Posted: 22 Jan 2015 at 12:58pm
Most tracks I've seen around here are clay. I want to stay with original rims, what size would you recommend? ------------- 1955 WD45 S#205467, 190XT #6652 DXT |
Pipe wrote:Posted By: Pipe
Date Posted: 22 Jan 2015 at 7:29pm
|
13.6 uncut and 14.9 for cut tires firestone 23 degree I have ran 13.9 x 38 and did well also but I have a step down trans also. Good luck |
Posted By: Kip-Utah
Date Posted: 25 Jan 2015 at 11:18pm
|
The 14.9 x 24 tires on our 37 & 38 WC pullers have worked fine for us on the stock rims. The 37 is on spokes and the 38 is pressed steel discs. Both of these style rims are fairly narrow 6 to 8 inches wide and conventional wisdom says this is a poor combination...our trophy shelf says otherwise!! Actually the tires on both tractors are intended for use on center pivot irrigation systems. The 37 has one Goodyear 45 degree and one Firestone 30 degree mismatched set and the 38 tires are 30 degree Chinese generic "Irrigation Special" tires. ------------- HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!! |
Posted By: NDBirdman
Date Posted: 26 Jan 2015 at 12:44am
|
Mines a '36 unstyled. Will the 14.9 x 24 fit under the fenders with no modifications?
------------- 1955 WD45 S#205467, 190XT #6652 DXT |
Posted By: CTuckerNWIL
Date Posted: 26 Jan 2015 at 4:53pm
|
Original size would have been 11.25 x24 old size, newer size 14.9x24 (13x24) newest size 380/85x24. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Kip-Utah
Date Posted: 26 Jan 2015 at 11:37pm
|
14.9 X 24 tires fit fine with either style WC fender. ------------- HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!! |