another 8010 question(s)
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10013
Printed Date: 22 Jan 2025 at 12:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: another 8010 question(s)
Posted By: clint
Subject: another 8010 question(s)
Date Posted: 25 Mar 2010 at 8:28am
|
with the big ends in on the arms- it is too wide to fit my jd 2600 plow- it this normal? the plow is set for cat 2 or cat 3, and i want it hooked cat 3. the best i can get is 1 big end one small- it has play.
also the tb doesnt work- the cable is free- which of those 3 holes should the linkage be in? mine is in the middle. zero response.
last night i wanted to turn the tractor off to check something- i turned off the key, but got out of the cab without shutting off the fuel. ran for several minutes like that before i got back in saw the tach etc off- did i hurt anything?
-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62
|
Replies:
Posted By: monitordoc
Date Posted: 25 Mar 2010 at 9:16am
|
YOU NEED A LITTLE SIDE TO SIDE FREE PLAY IN THE THREE POINT OR YOU WILL BEND OR BREAK SOMETHING. AS FAR AS RUNNING WITH THE KEY OFF-- I KNOW OF GUYS WHO RAN THAT WAY TO CUT BACK ON TACH HOURS FOR TRADE IN TIME. THEY WOULD TURN THE KEY ON TO CHARGE THE BATTERIES THEN OFF AGAIN.
-------------
WD,D17-S4,180,D21
|
Posted By: BobHnwO
Date Posted: 25 Mar 2010 at 9:37am
|
I addressed the sway blocks at the end of your other post,sway blocks should have the small end in,with the plow hooked up the distance between the 3 point arms should be about 32 inches on the inside.
|
Posted By: BobHnwO
Date Posted: 25 Mar 2010 at 9:46am
|
With the position control lever all the way forward you should be able to raise and lower the 3 point arms with the traction control lever,if not check fluid level.
|
Posted By: clint
Date Posted: 25 Mar 2010 at 11:48am
should i use the diff lock?
-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62
|
Posted By: BobHnwO
Date Posted: 25 Mar 2010 at 12:08pm
|
not unless you get stuck.
|
|