| Author |
 Topic Search  Topic Options
|
DougG 
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8109
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: P series pump options on a 426
Posted: 05 Jul 2014 at 8:24am |
|
Im kinda new to P pumps and planning putting a prostock together with a 426 engine, but gonna resleeve it for 466 with hardened rods: class is 9500 lbs, 3000 rpms,3
.o inlet on turbo and water is allowed, my question is what a good pump to look for? I can change the front plate and all that just not real familar with big pumps
Edited by DougG - 06 Jul 2014 at 10:46am
|
 |
|
Sponsored Links
|
|
|
bsallis180
Silver Level
Joined: 29 Jul 2013
Location: Pennsylvania
Points: 209
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Jul 2014 at 1:57pm |
|
the front plate just needs machined out to accept the lager pump im guessing, im a 301 guy and depends on how much fuel and class rules here its a-pumps and P-pumps depends on set up and weight inter cooler or not in a limited pro
|
|
O.P.S. Heads
Orange Level Access
Joined: 02 Jan 2013
Location: Iowa
Points: 574
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Jul 2014 at 5:26pm |
|
Get everything else done first and buy your fuel system and turbo last. Technology on these pieces changes all the time and they are the most important power making items.
My buddy uses a Bosch P3000 from a John Deere tractor (40 series?) They have a nice governor for pulling. All the innards will need to be replaced with good stuff - cam P's and B's etc. I would not use anything but 13mm plungers. Sometimes you can find a nice used pump on the Pull Off, but that's always a buyers beware deal.
Edited by O.P.S. Heads - 07 Jul 2014 at 5:28pm
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20528
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Jul 2014 at 7:24pm |
|
Easier to hang a "P" pump on a 7000 series or newer block versus a D21- 210-220 block.
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jul 2014 at 5:22pm |
|
Mounting a P-pump on a 426 will require you to cut one mounting "ear" off the pump so it will fit.
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jul 2014 at 5:25pm |
Here's one im working on. Cut the ear off and had the drive hub made from a hub off the newer roosamaster.  This is a core pump also.
Edited by peterson - 08 Jul 2014 at 5:26pm
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8109
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jul 2014 at 6:26pm |
|
Thanks for the info
|
|
O.P.S. Heads
Orange Level Access
Joined: 02 Jan 2013
Location: Iowa
Points: 574
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jul 2014 at 9:36pm |
|
I have heard you can reduce the O.D. of the pumps front bearing support to fit the stock hole in an Allis plate. This could be an option if you don't have a way to bore the plate and keep it on center. You have to clearance the front plate and timing cover for the rack cap on the front of the pump also. Be sure to build a brace at the rear of the pump which ties the pump to the engine pan rail bolts or something solid toward the rear of the pump to keep it from moving. All of this work should be done before the pump is built(obviously).
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8109
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Jul 2014 at 2:20am |
|
Right on, i heard they need support as being very heavy hanging back there, this is all pre planning stuff, thanks!
|
|
