| Author |
 Topic Search  Topic Options
|
alan-nj 
Orange Level
Joined: 12 Sep 2009
Location: oxford, nj
Points: 847
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: more piston ID
Posted: 02 Jan 2011 at 8:14am |
As long as benny rasied the question, i thought i'd ask the same thing. i had the head off my 48 wd last week. this is the piston that is in it. 4 and 1/8 bore. obviously not original. made out of aluminum. can anyone identify the brand? are these m & w or some other brand? thanks alan 
|
 |
|
Sponsored Links
|
|
|
Denis in MI
Orange Level
Joined: 15 Sep 2009
Location: Norvell, MI
Points: 832
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2011 at 8:16am |
M&W I have a set in a WD45.
Hope that helps,
Denis
|
|
1938 B, 1945 B, 1941 IB, 1949 C, 2 1938 WCs, 3 1950 WDs, 1951 WD, 2 1955 WD45, 1957 D-14
|
|
alan-nj
Orange Level
Joined: 12 Sep 2009
Location: oxford, nj
Points: 847
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2011 at 8:29am |
|
thanks. i put a set of m & w in my wc a couple of years ago, but i didn't remember exactly what they looked like and i didn't take any pictures.
|
|
Allis Fields
Orange Level
Joined: 17 Sep 2009
Location: Reedsburg,Wisc.
Points: 332
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2011 at 5:11pm |
|
Have you checked what the stroke is? 4" is wd 4.5" wd45 crank. M&W ap46 is thw wd - wc part number I think.
|
|
Allis orange blooded by family. Allis Diehard by choice
|
|
mlpankey
Orange Level
Joined: 13 Sep 2009
Location: Vols country
Points: 4580
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2011 at 5:29pm |
 alan-nj wrote:
As long as benny rasied the question, i thought i'd ask the same thing. i had the head off my 48 wd last week. this is the piston that is in it. 4 and 1/8 bore. obviously not original. made out of aluminum. can anyone identify the brand? are these m & w or some other brand? thanks alan |
while you have the head off take a syringe in ccs and see how much fluid that dish holds and how far below the deck the outside ledge is at tdc for me . will you?
Edited by mlpankey - 02 Jan 2011 at 5:30pm
|
|
alan-nj
Orange Level
Joined: 12 Sep 2009
Location: oxford, nj
Points: 847
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2011 at 6:18pm |
mitch.. sorry, the head's back on the wd. but, i will be pulling my wc apart sometime this winter. the wc has the m&w ap48 pistons. let me know if you want those measured. allis fields...the wc has a 4 1/2 inch stroke, the wd has a 4 inch stroke. alan
|
|
wi50
Orange Level
Joined: 24 Sep 2010
Location: weegieland
Points: 1010
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2011 at 6:28pm |
I think the M&W's hold about 70cc. I will check for sure, I have both AP46 and AP48 bead blasted and cleaned up. I'll take a piece of plexiglas and a syrenge and check for sure in the next day or two. I'll also post the compression height.
I know with the CC of the dish and the comp height, I figured them at just shy of 7.5 comp, but I didn't have any plexiglas and the CC measurement was only "close".
|
|
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
|
Steve M C/IL
Orange Level
Joined: 01 Jul 2010
Location: shelbyville IL
Points: 691
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2011 at 11:03pm |
|
No plexiglass and allowing for surface tension,my sp48 M&W's held 83cc.The new sp48 sold by Hershal Adams held 90cc.
|
|
