HD16 Exhaust manifold

yes 844. do not think it would be hard to locate a used one here in the US but you may be money ahead to fabricate with transport costs. all HD16 manifolds prior to Series B with turbos are the same I believe. early hd21 buda manifold would work as well no turbo. I actually have 1 but don't care to sell it.

Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

there's a parked later model 16 (square design) with a fabricated ex manifold on it.The builder put his name on it in weld.Did a decent job.

gemdozer wrote:

Do you have a part number for the exhaust manifold

I ned the complete manifold assembly.

When doing your searches be sure to include the engine series number "IE 16,000" along with what your using which is the cubic inch displacement of the engine.

There was several different exhaust manifolds that where used on the "844 cubic engine".

Thanks all off you 👍🏻

I hope I can find one, my google search have not been very helpful yet

So far no luck on my search. I have my local Agco shop looking at old dealer inventories as well.

I have a crack on my center section of my exhaust manifold but I'm going to take it off clean it out and braze it when ready. My dealer was able to get me all new gaskets, studs and connection rings new. Still looking for you .

Mine is not fix able

Oh man,, straight pipes would be ear killers for sure Ian. Would be fun to hear it though.

I have a complet exhaust manifold but not the same parts number.

What are the numbers for your manifold gemdozer?

Just a reminder: Just because a number is cast into a part doesn't mean that is the part number, it could be just a "casting" number and the actual part number could be something else.

AC would sometimes use the same casting for different multiple parts.

gemdozer wrote:

I have a complet exhaust manifold but not the same parts number.

What are your asking price for it?

Can you post a picture of your broken manifold? I'm curious how bad it might be.

Because narrow is the gate, and narrow is the way, which leads unto life, and few there be that find it.
Mathew 7:14

Ferdinand wrote:

Can you post a picture of your broken manifold? I'm curious how bad it might be.

there are 3 holes one in each manifold piece. All 3 holes are about 1x1 inch

This might be a difficult solution but, ...
A couple of years ago I was going to make a custom exhaust system for car. A local company said they could waterjet cut a 3/8" thick steel flange for the header pipes.
I was going to use a tube bender and have the local welding shop make the pipes and weld them to the flange. Quoted cost of the one-off waterjet flange was "less than a hundred dollars".
The welder would charge about $250.00

P.S. Somewhere on Youtube there is a video of a guy making a simple custom exhaust for an International dozer. He took a big steel pipe and made a "log" runner style exhaust.

Edited by Ferdinand - 03 Dec 2017 at 5:15pm

Because narrow is the gate, and narrow is the way, which leads unto life, and few there be that find it.
Mathew 7:14

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History