This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Allis Chalmers > Construction and other equipment
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


Cylinder rebuild tool
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
KRAKMT View Drop Down
Bronze Level
Bronze Level
Avatar

Joined: 21 May 2010
Location: MT
Points: 83 		Post Options Post Options   Thanks (0) Thanks(0)   Quote KRAKMT Quote  Post ReplyReply Direct Link To This Post Topic: Cylinder rebuild tool
    Posted: 29 Apr 2012 at 1:07pm
Does anyone have a design for making a spanner wrench for removing the end nut from the cylinders of a 715 b backhoe?
These are the lifts that need some new guts- the ends have three notches-
Can weld something up but wondering if someone has perfected a design and would like to share...




Edited by KRAKMT - 29 Apr 2012 at 1:08pm
Back to Top
Sponsored Links


Back to Top
Coke-in-MN View Drop Down
Orange Level Access
Orange Level Access
Avatar

Joined: 12 Sep 2009
Location: Afton MN
Points: 41211 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Coke-in-MN Quote  Post ReplyReply Direct Link To This Post Posted: 29 Apr 2012 at 2:18pm
I used a 36" pipe wrench .
My lift cylinders have been no problem but the hoe cylinders I have had to replace one piston and one of the end seal glands. The gland or part under that locking ring i got from Minnpar but the piston i made out of aluminum to match the cast iron one that had worn and chipped area.
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
Back to Top
jnicol6600 View Drop Down
Bronze Level
Bronze Level


Joined: 02 Jul 2011
Location: Sullivan Co. IN
Points: 174 		Post Options Post Options   Thanks (0) Thanks(0)   Quote jnicol6600 Quote  Post ReplyReply Direct Link To This Post Posted: 29 Apr 2012 at 7:37pm
I used to use a big punch and a BFH on logging equipment.
Back to Top
wfmurray View Drop Down
Orange Level
Orange Level


Joined: 13 Sep 2009
Location: Bostic NC
Points: 1225 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wfmurray Quote  Post ReplyReply Direct Link To This Post Posted: 30 Apr 2012 at 6:22am
Strap wrench or chain wrench would do less damage to cyl.
Back to Top
Coke-in-MN View Drop Down
Orange Level Access
Orange Level Access
Avatar

Joined: 12 Sep 2009
Location: Afton MN
Points: 41211 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Coke-in-MN Quote  Post ReplyReply Direct Link To This Post Posted: 30 Apr 2012 at 9:16am
Cast Iron cap with internal threads , locks the gland into cylinder , is just a end-cap and has no other purpose . Needs to be tight to hold the gland but does not seal or hold pressure or act on shaft . 
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.047 seconds.


Help Support the
Unofficial Allis Forum