Char-Lynn WD45 Brackets

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Good day everyone!  I recently purchased a removed from the tractor "complete" Char-Lynn power steering system for my WD45.  unfortunately it is missing 2 brackets and I am hoping someone could provide me some rough measurements so I can make them.  Given they are flat bent parts, should be easy to make. 
the brackets I need to make are the inboard bracket for the torque generator and the pump bracket to front cover on the "passenger side".  I need items 300 and 556 in the attached photo.  its likely easier for me to make them if someone could help me with what they are measurement wise.

uploads/23395/Snap21.png

Thanks!

Edited by Lingle - 3 hours 16 minutes ago at 12:30pm

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Lingle Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 30 Sep 2022 Location: Iowa Points: 38	Post Options Post Reply Quote Lingle Report Post Thanks(0) Quote Reply Topic: Char-Lynn WD45 Brackets Posted: 3 hours 18 minutes ago at 12:28pm
	Good day everyone! I recently purchased a removed from the tractor "complete" Char-Lynn power steering system for my WD45. unfortunately it is missing 2 brackets and I am hoping someone could provide me some rough measurements so I can make them. Given they are flat bent parts, should be easy to make. the brackets I need to make are the inboard bracket for the torque generator and the pump bracket to front cover on the "passenger side". I need items 300 and 556 in the attached photo. its likely easier for me to make them if someone could help me with what they are measurement wise. uploads/23395/Snap21.png Thanks! Edited by Lingle - 3 hours 16 minutes ago at 12:30pm
	35 and 41 WM crawlers, 49 WD, 53 WD45 wide front, 49 JD A, 52 JD B

Sponsored Links