| Author |
 Topic Search  Topic Options
|
Gavineg123 
Bronze Level
Joined: 29 Jan 2021
Location: United States
Points: 8
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: AC 816 Backhoe Parts
Posted: 31 Jan 2021 at 12:12pm |
|
Where is the best place to look for backhoe parts? For example gauges, starter, transmission, and hydraulic parts? Also, best place to buy engine parts? It’s a Perkins inline 4 cyl. Any help is appreciated
|
 |
|
Sponsored Links
|
|
|
gemdozer
Orange Level
Joined: 17 Sep 2009
Points: 942
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 Jan 2021 at 1:30pm |
|
You could check with MINNPAR
|
|
Coke-in-MN
Orange Level Access
Joined: 12 Sep 2009
Location: Afton MN
Points: 41212
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 Feb 2021 at 5:36pm |
the AC 816 used a AC engine from my knowledge , the 715 used a Perkins 236 - 4 cylinder
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
|
Jim.ME
Orange Level
Joined: 19 Nov 2016
Location: Maine
Points: 937
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 Feb 2021 at 7:48pm |
|
816 and 816B parts books at Minnpar show Perkins.
|
|
Gavineg123
Bronze Level
Joined: 29 Jan 2021
Location: United States
Points: 8
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 Feb 2021 at 8:02pm |
|
I’ve got a service manual for it and it shows a Perkins 4.248 engine
|
|
Eric B
Orange Level
Joined: 09 Feb 2012
Location: British Columbi
Points: 888
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Feb 2021 at 12:17pm |
|
So many parts for the 816 are found in and on other industrial equipment. Therefore it helps to search the brands on each component rather than searching for '816 parts' as direct listings are simply harder to trace being they were made around 40 to 50 years ago. Like the starter for example if you get the number off of it you will have a much easier time tracking a replacement or individual parts. You can find gauges that fit but they may no have the AC logo on them. The forward reverser is a Borg Warner, the rear end is Rockwell, the hyd. pump is a Commercial Shearing, the engine being a Perkins 248 is not hard to find parts for as they were widely used in many applications.
|
|
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!
|
|
david a
Bronze Level
Joined: 29 Jan 2012
Location: almond
Points: 67
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Feb 2021 at 3:46pm |
|
had a hard time finding the steering pump. The shuttle is a WG. not a borg werner hard to find parts for. I rebuilt mine the forward clutch is hard to come by. The engine is a Perkins. The main hydraulic pump is a expensive one to rebuild. The shift cable is hard to come by. I sold mine last year for $5500. just got tired of the scavenger hunt. and the expensive parts.
|
|
Eric B
Orange Level
Joined: 09 Feb 2012
Location: British Columbi
Points: 888
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Feb 2021 at 11:42am |
 david a wrote:
had a hard time finding the steering pump. The shuttle is a WG. not a borg werner hard to find parts for. I rebuilt mine the forward clutch is hard to come by. The engine is a Perkins. The main hydraulic pump is a expensive one to rebuild. The shift cable is hard to come by. I sold mine last year for $5500. just got tired of the scavenger hunt. and the expensive parts. |
What model year was your 816? The two I had were made in 1970 and they both had Borg Warner forward reverser.
|
|
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!
|
|
david a
Bronze Level
Joined: 29 Jan 2012
Location: almond
Points: 67
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Feb 2021 at 8:01pm |
think mine was a 1975. and It was a werner gear shuttle . Had very big clutch plates.
|
|
