This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Allis Chalmers > Construction and other equipment
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


A/C A816
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
Gordy53 View Drop Down
Bronze Level
Bronze Level
Avatar

Joined: 29 Jan 2021
Location: Henderson, Neva
Points: 8 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Gordy53 Quote  Post ReplyReply Direct Link To This Post Topic: A/C A816
    Posted: 29 Jan 2021 at 9:28am
I just bought an A/C 816 we got it started on starter fliud but will not keep running
Checked fuel filter is full
There is how ever a wire by ignition S/W that is not connected could this be for the on/off fuel solenoid any thoughts 
Back to Top
Sponsored Links


Back to Top
Jim.ME View Drop Down
Orange Level
Orange Level


Joined: 19 Nov 2016
Location: Maine
Points: 937 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Jim.ME Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jan 2021 at 11:28am
I would start by using a test light or voltmeter to see if there is power at the shutoff when the key is on, before just hooking up loose wires.  If there is no power, I would next try a jumper wire to power the shutoff.  I might try using a jumper to power the loose wire and test to see if it did power the shut off, before hooking it to the switch.

  If the machine has been setting for a time there may be issues (things stuck) inside the pump, that starting it hasn't improved.
Back to Top
gemdozer View Drop Down
Orange Level
Orange Level


Joined: 17 Sep 2009
Points: 942 		Post Options Post Options   Thanks (0) Thanks(0)   Quote gemdozer Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jan 2021 at 12:24pm
Did you check if the trottle rod is connected
Back to Top
Eric B View Drop Down
Orange Level
Orange Level
Avatar

Joined: 09 Feb 2012
Location: British Columbi
Points: 888 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Eric B Quote  Post ReplyReply Direct Link To This Post Posted: 30 Jan 2021 at 1:51pm
Every 816 I've seen has mechanical fuel shut off, if it is still mechanical on this be sure the shut off lever on the pump is in the 'moved forward position'. You may also need to check if the primary pump on the side of the block is putting out pressure. On my 816's I bypassed the primary pump and only operated them on gravity feed as the tank is so high up.
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!
Back to Top
david a View Drop Down
Bronze Level
Bronze Level
Avatar

Joined: 29 Jan 2012
Location: almond
Points: 67 		Post Options Post Options   Thanks (0) Thanks(0)   Quote david a Quote  Post ReplyReply Direct Link To This Post Posted: 14 Feb 2021 at 3:49pm
Mine 816 had a cable fuel cut off .  you could convert it to a solenoid. Likeit was stated make sure the fuel shut off is forward 
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.078 seconds.


Help Support the
Unofficial Allis Forum