This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
WD/45 Tie down brackets |
Post Reply |
Author | |
IBWD MIke
Orange Level Joined: 08 Apr 2012 Location: Newton Ia. Points: 3436 |
Post Options
Thanks(0)
Posted: 25 Oct 2020 at 7:33am |
I trailer my WFE WD45 a fair amount. Used to just run a chain around the front axle tube and bind her down. After the front-end rebuild and painting I can't do that anymore. Have been using 1/2" 'swivels', down side is they have to be removed before moving the tractor as the hoop would hit. Found a couple of weld on chain hooks in the shed awhile back and got this idea. Found some flat iron the right size, little welding, little paint, wala! Pictures in reverse order as usual, you get the idea. |
|
Sponsored Links | |
Kenny L.
Orange Level Access Joined: 12 Sep 2009 Location: NEIOWA Points: 1224 |
Post Options
Thanks(0)
|
Mike that neat I've seen them weld on the frame behind the front wheels.
|
|
Ky.Allis
Orange Level Joined: 31 Jan 2010 Location: Kentucky Points: 962 |
Post Options
Thanks(0)
|
Dam I wish I could weld that good. Looks nice!!!!
|
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8167 |
Post Options
Thanks(0)
|
Mike,
I was thinking the same thing on that weld! You laid down a nice bead! Regards, Chris
|
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
sparky
Orange Level Access Joined: 13 May 2011 Location: So. Indiana Points: 1459 |
Post Options
Thanks(0)
|
If you don’t mind me asking where did you get them weld ready hooks? TIA
|
|
It's the color tractor my grandpa had!
|
|
IBWD MIke
Orange Level Joined: 08 Apr 2012 Location: Newton Ia. Points: 3436 |
Post Options
Thanks(0)
|
Thanks guys, since I found the local/remote setting on the welder, it's working much better for me! Chris, I put three passes in each joint. Welder is set up on tig right now, going to build an engine stand and possible some splitting stands this winter so I will have to change it back to mig. Hate changing from one to the other. Kenny, I wanted something removable, hopefully looks better and can be used on my other WD's/45's. |
|
Dusty MI
Orange Level Joined: 13 Sep 2009 Location: Charlotte, Mi Points: 5053 |
Post Options
Thanks(0)
|
I hauled our car on the trailer once and tried to bind it down. That didn't work real well. Then I noticed that the flat bed car haulers were lassoing the tires/wheels with straps. I tried that, which worked well. So now I do that when hauling my tractors, front and back.
It's my understanding that regulations require that things need to be 4 separate point tie down. Dusty
|
|
917 H, '48 G, '65 D-10 series III "Allis Express"
|
|
IBWD MIke
Orange Level Joined: 08 Apr 2012 Location: Newton Ia. Points: 3436 |
Post Options
Thanks(0)
|
Here she is on the trailer, new brackets work great! Since this tractor is what I haul most on here I decided dedicated chains were in order. Cut one 16 footer in two, much better to work with. Picture was taken after returning from a local plow-day. That ol' river bottom gumbo is tough! Plow is getting shinier. Found some pretty good rocks, one big enough to kick out the hand clutch. |
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 19477 |
Post Options
Thanks(0)
|
Two tie down chains are legally enough on something that only weighs 5,000 lbs.
|
|
john(MI)
Orange Level Joined: 12 Sep 2009 Location: SE MI Points: 9263 |
Post Options
Thanks(0)
|
Great idea and it works really well. Personally, I would back the tractor up to tighten those chains and put binders on the rear.
|
|
D14, D17, 5020, 612H, CASE 446
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 19477 |
Post Options
Thanks(0)
|
Binders on the front for safest results. Rear chain(s) adjusted to a proper length and tractor driven ahead until taunt and set brakes and leave in gear. Binder the front. A broken binder on the rear (been there before) leaves the tractor loose when you hit the brakes.
|
|
Kiwi
Silver Level Joined: 23 Jan 2018 Location: New zealand Points: 371 |
Post Options
Thanks(0)
|
Hi all the tie down brackets look good I have done the same sort of thing to my Ford 4600 that I transport around to ploughing matchs but I pull the front chains back and put a chain around the drawbar and pull it forward. I all so put a old car tire under the plough shear to stop it rubbing on the deck of the truck it all so stops the shear from braking
|
|
Tractors Allis EB,two C,diesel G
|
|
IBWD MIke
Orange Level Joined: 08 Apr 2012 Location: Newton Ia. Points: 3436 |
Post Options
Thanks(0)
|
Interesting, never thought of that. I just drive the tractor on until I get the tongue weight right then stop and tie her down there. Have been running the two in the front and one in the back. Need to come up with some brackets for the back to run two chains there too. I do leave the tractor in gear and set the brakes.
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 19477 |
Post Options
Thanks(0)
|
On my tractors that I haul regularly, my rear chain is a specific length (or marked with zip ties in a specific link) so the tractor is always parked in the same exact spot. I never worry when I take off down the road that I have too much or too little tongue weight. It's always the same.
|
|
TedBuiskerN.IL.
Orange Level Joined: 11 Sep 2009 Location: Davis, IL. Points: 1959 |
Post Options
Thanks(0)
|
I use 5/8" eye bolt nuts on the front wide front adjusting bolts to hold mine, works great, no welding or things to attach. Available at Fastenal. His method is probably a bit stronger than mine, but I use load binders on them and they seem very strong.
Edited by TedBuiskerN.IL. - 02 Nov 2020 at 11:10am |
|
Most problems can be solved with the proper application of high explosives.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |