This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Some more questions |
Post Reply |
Author | |
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8151 |
Post Options
Thanks(0)
Posted: 28 Feb 2020 at 10:59pm |
Hi everybody. Have some more parts that I'm not sure of.
First is a small spring about 9/16" long X just under 1/2" OD X 3/8 ID. It had a tag 510410 but I have others of that part number and not the same Second is a cap with part number of 074263 which isn't in the books I have here. Looks like a gas cap. Third is a bearing with part number 042986 which isn't in my book either, bearing is bsa 205. Fourth is a oring with part number 200656 on it Fifth is seals that has part number 320280 on them, think seal numbe is CR 44112. 2-7/16" OD X 1-7/16" or 1-3/8" ID X just over 7/16" thick The oring The seals Thanks for looking and helping out Edited by Mikez - 28 Feb 2020 at 11:08pm |
|
Sponsored Links | |
NE GA Allis
Bronze Level Joined: 17 Feb 2019 Location: Georgia Points: 139 |
Post Options
Thanks(0)
|
The cap 074263 is a radiator cap for HD5 and HD6. May fit other construction equipment as well. If you are selling it, I need one! Been running our HD5G for three years with a soup can over the radiator neck since we got it.
|
|
Keeping Allis alive with:
2 B’s, 1 C, 6 CA’s, 2 WD’s, 1 WD45, 3 D15D’s, 1 D17 |
|
NE GA Allis
Bronze Level Joined: 17 Feb 2019 Location: Georgia Points: 139 |
Post Options
Thanks(0)
|
Also found the bearing 042986.
Fits: 7MD 80SI = sickle mower 90SA = harvester special attachments 100SA = harvester special attachments PHD = post hole digger |
|
Keeping Allis alive with:
2 B’s, 1 C, 6 CA’s, 2 WD’s, 1 WD45, 3 D15D’s, 1 D17 |
|
NE GA Allis
Bronze Level Joined: 17 Feb 2019 Location: Georgia Points: 139 |
Post Options
Thanks(0)
|
I’ll check on the spring. I think I have got a hardware book somewhere with dimensions and part numbers.
|
|
Keeping Allis alive with:
2 B’s, 1 C, 6 CA’s, 2 WD’s, 1 WD45, 3 D15D’s, 1 D17 |
|
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8151 |
Post Options
Thanks(0)
|
Wow thanks Evan. PM me your email i have some pictures for you
Edited by Mikez - 29 Feb 2020 at 12:20am |
|
orangereborn
Orange Level Joined: 12 Sep 2009 Location: NW WI Points: 1403 |
Post Options
Thanks(0)
|
Mike...That tag doesn't go with that spring, correct? Dale
|
|
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8151 |
Post Options
Thanks(0)
|
Well that's how I found it but I know that 510410 is a different spring. Hoping to identify that one.
|
|
Kenny L.
Orange Level Access Joined: 12 Sep 2009 Location: NEIOWA Points: 1225 |
Post Options
Thanks(0)
|
Mike the cap will work on row crop tractor also,
510410- spring is for RB,100SP,77G,303,78,801,802 I came up with the same has Evan on the bearing, the other two I didn't come up with anything. HTH
|
|
NE GA Allis
Bronze Level Joined: 17 Feb 2019 Location: Georgia Points: 139 |
Post Options
Thanks(0)
|
Sorry Mike, no luck on the spring. The hardware book I have shows everything but springs.
|
|
Keeping Allis alive with:
2 B’s, 1 C, 6 CA’s, 2 WD’s, 1 WD45, 3 D15D’s, 1 D17 |
|
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8151 |
Post Options
Thanks(0)
|
The spring number 510410 looks like this. That's why I knew the one in above picture wasn't right
#3 is the 303 baler an #8 is the 77 an 78 rake Edited by Mikez - 01 Mar 2020 at 7:16pm |
|
tbran
Orange Level Joined: 14 Sep 2009 Location: Paris Tn Points: 3244 |
Post Options
Thanks(0)
|
You can go to agcopartsbooks.com and enter as guest and then go to BROWSE -go to agco allis - then browse - for your 200000 # add 70 as on 70237000 and you think it fits say a D17 then up at the top to the right of the house type the # in and it will pop up if it us used on the machine. Dealers have the ability to do master searches which is easier. You know 200000 fit tractors and 70931650 for example are purchased items like cotter keys and bolts. 500 #'s like 70515224 fit 66 72 all crops. Hope this helps.
|
|
When told "it's not the money,it's the principle", remember, it's always the money..
|
|
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8151 |
Post Options
Thanks(0)
|
Thanks tbran that's a good idea. For some reason this iPad won't open that site. It used to work, a year ago. This past year there's many sites that don't work. Think it's to old, time for a new one.
|
|
Ted J
Orange Level Joined: 05 Jul 2010 Location: La Crosse, WI Points: 18727 |
Post Options
Thanks(0)
|
That spring looks like the spring that is on the hydraulic control on a CA.
70225268 1 SPRING, control lever friction washer Add it to my stuff Mike, if you haven't mailed it out already. I'm betting that's what it is. Sure looks like it. |
|
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
|
Gary
Orange Level Access Joined: 13 Sep 2009 Location: Peterborough,On Points: 5175 |
Post Options
Thanks(0)
|
Spring 510410 also looks like thermostat spring for B, C, and early CA P/N 219734 , also 70 272321 on OK Tractor Website https://www.ebay.com/itm/THERMOSTAT-SPRING-Allis-Chalmers-B-C-CA-IB/274104177430?hash=item3fd1e1d316:g:Z8wAAOSwjPVd1BHn |
|
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8151 |
Post Options
Thanks(0)
|
Hi Ted do you have measurement of the spring
|
|
HaroldOmaha
Orange Level Access Joined: 11 Sep 2009 Location: Omaha Points: 862 |
Post Options
Thanks(0)
|
That little clip in the lower right of the first picture is the lock for the connector link in a roller chain.
|
|
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8151 |
Post Options
Thanks(0)
|
Thanks Harold, I did have that, didn't mean to have all that other stuff in picture. Thanks guys
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |