This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
D14 Power director |
Post Reply |
Author | |
DSeries4
Orange Level Joined: 12 Sep 2009 Location: Ontario, Canada Points: 7191 |
Post Options
Thanks(0)
Posted: 13 Jan 2020 at 7:45pm |
My mechanic finally finished rebuilding the transmission in my 1959 D14 - it was only in his shop for 6 years! Now that it is as good as new, the hand clutch needs rebuilding too. The rear hub clutch (part #70228071) is what I am looking for. My AGCO dealer says they are no longer available. You can see mine has chunks missing out of the teeth. Looking for one in excellent condition or NOS. I have also heard the clutch plate assembly (Part #70232080) is available aftermarket. Does anyone have a price for these? Many thanks!
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
Sponsored Links | |
Stan R
Orange Level Access Joined: 03 Dec 2009 Location: MA Points: 943 |
Post Options
Thanks(0)
|
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 21336 |
Post Options
Thanks(0)
|
wife would say you need to come down and buy #3 from me.....
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
Brian Jasper co. Ia
Orange Level Joined: 11 Sep 2009 Location: Prairie City Ia Points: 10508 |
Post Options
Thanks(0)
|
All of the friction and steel separator plates are available both from Agco and aftermarket. I went through my clutch on my D17 and if I remember correctly there are 7 of each plate and the steels were about $40 each and the friction about $60 each. Then there's the roller lock plates and a center plate. To fix the clutch correctly so it stays fixed is not an inexpensive endeavor.
Off the top of my head you will also want the 6 rollers, new pin lock rings, 6 separator springs, new O rings for the power director shaft and PTO lever shaft, new transmission input shaft seal, new PTO shaft seal on the transmission side. I might be leaving something out, but this is a very good start to do a first class repair.
|
|
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford
|
|
DSeries4
Orange Level Joined: 12 Sep 2009 Location: Ontario, Canada Points: 7191 |
Post Options
Thanks(0)
|
I have most of the parts I need, except for the rear hub clutch (part #70228071) - pictured above. I posted an ad in the classifieds. Please send me a PM if you have a good one. Thanks very much!
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
PaulB
Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4384 |
Post Options
Thanks(0)
|
If you were not North of the boarder, I have a complete D15 power director I'd sell you. Unfortunately I've had nothing but problems with dealing into Canada.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |