This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
2005 Saturn Veu front brakes |
Post Reply |
Author | |
DougG
Orange Level Joined: 20 Sep 2009 Location: Mo Points: 7943 |
Post Options
Thanks(0)
Posted: 20 Apr 2019 at 1:29pm |
Got a 2005 Saturn Vue and having front brake issues , heres what happened, passenger side front brake caliper stuck one day so replaced the rubber brake line , it had a shimmy when applying the brakes after , and they were wore down so replaced the front brake pads and rotors on both sides, also replaced the wheel bearing assemble as it had a little play too,caliper / brake come on ,relubed the sliding pins ran good for a few weeks and done it again , put a new caliper on it , now it drives great but sometimes out of the blue its like the passenger side brake comes on with a grinding noise then stops after a bit, no ABS light comes on , im stummped !
|
|
Sponsored Links | |
chaskaduo
Orange Level Joined: 26 Nov 2016 Location: Twin Cities Points: 5203 |
Post Options
Thanks(0)
|
I had a car do that before and ended up replacing the proportioning valve. Your mileage may vary.
|
|
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp
|
|
DougG
Orange Level Joined: 20 Sep 2009 Location: Mo Points: 7943 |
Post Options
Thanks(0)
|
Its got 197000 on it so probably a good thing to replace, or its in the ABS controller thanks
Edited by DougG - 21 Apr 2019 at 7:00am |
|
fixer1958
Orange Level Joined: 13 Feb 2010 Location: kansas Points: 2435 |
Post Options
Thanks(0)
|
Does it sound like the ABS pump is coming on when you say a 'grinding noise'?
|
|
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 21445 |
Post Options
Thanks(0)
|
could be a slug of air in the other side brake line. It took me 6 tries to get AIR the air outta the forklift brakes and that only has 3' of tubing ! A slight bend was allowing the bubble to go back and forth... sigh. |
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
DougG
Orange Level Joined: 20 Sep 2009 Location: Mo Points: 7943 |
Post Options
Thanks(0)
|
No noise from the ABS
|
|
Dakota Dave
Orange Level Joined: 12 Sep 2009 Location: ND Points: 3893 |
Post Options
Thanks(0)
|
You changed the hoses and calipers did you use a tech 2 and bleed the brakes if not your ABS module probably has air in it. It wont cause the ABS light to come on but you wont get a good bleed without comanding bleed mode in the ABS
|
|
chaskaduo
Orange Level Joined: 26 Nov 2016 Location: Twin Cities Points: 5203 |
Post Options
Thanks(0)
|
Gotta love them A$$inine Brake Systems.
|
|
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp
|
|
DougG
Orange Level Joined: 20 Sep 2009 Location: Mo Points: 7943 |
Post Options
Thanks(0)
|
Didn't do nothing like that Dave just bleed them the way I do with others, gotta do some homework!
Edited by DougG - 23 Apr 2019 at 8:05am |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |